Why do we need transmission lines?
Why do we use capacitors in AC?
Why do we use a transmission line?
Why we use ac system in India why not dc?
Why use DC for transmission lines?
Why do we use 3 wire in RTD?
Why do we use sodium light in Newton Ring?
Why do we use inductor in buck converter? Answer : In a **buck converter**, the inductor plays a key role in the operation and performance of the circuit. Here's why it is used: 1. **Energy Storage**: The inductor stores energy ... smooth the current, and it enables the converter to step down the voltage efficiently while minimizing current ripple....
Why do we use 25 kV in railway?
Why do we use FFT in signal processing?
Why do we use the Fourier transform in signal processing?
Why do we normally use Fourier transform in communication system?
Do we use AC or DC to charge a battery ?
Do we use AC or DC at home?
Do we use AC or DC today?
Do transmission lines have AC or DC?
Do transmission lines carry AC or DC?
Why do we use multiplexing?
Why do we use adder?
Why do we use tunnels?
Why do we use tunnel diode?
Why do we use Newton's ring experiment?
Why do we use a Zener diode?
Why do we use 60Hz and 50Hz for electric power?
Why do we use N-type MOSFET? Answer : N-type MOSFETs (Metal-Oxide-Semiconductor Field-Effect Transistors) are widely used in electronic circuits for several key reasons: ### 1. **Electron Mobility**: N-type MOSFETs use * ... , and efficiency**, especially when combined with P-type MOSFETs in complementary configurations like CMOS....
Why do we use bimetallic?
Why do we use the Helmholtz equation?
Why do we use Laplace theorem?
Why do we use Laplace?
Why do we use Laplacian?
Why do we use Laplace equation?
Why do we use 2 batteries?
Why do we use ABCD parameters?
Why do we use Z and Y parameters?
Why do we use Thevenin's theorem?
Why do we use superposition principle?
Why do we use mesh?
Why do we use nodes?
Why do we use voltage divider rule?
Why do we use potential dividers as sensors? Answer : We use potential dividers as sensors because they can convert a physical parameter (like light, temperature, or pressure) into a measurable voltage change that can be easily read by a microcontroller or other ... that can be read by a circuit, making them useful in a wide range of applications....
Why do we still use conventional current?
Why do we use conventional current instead of electron flow?
Why do we use a buck-boost converter?
Why do we use apparent power?
Why do we use 11kV to 33kV?
Why do we use transient?
Why do we use PLC?
Why do we use DC current?
Why do we convert AC to DC? Answer : Converting AC (Alternating Current) to DC (Direct Current) is essential for several reasons, mainly because many electronic devices and circuits require DC to function properly. Here's why: ### ... is crucial because most devices need a steady, unidirectional flow of electricity to work properly....
What would happen if we use DC source instead of AC source in mutual induction?
29.4k questions
1.3k answers
7.3k users