How to convert ammeter to voltmeter?
How to convert voltmeter to ammeter?
What is galvanometer and how it is converted into ammeter and voltmeter?
How to calculate LC of ammeter?
How to calculate the reading of ammeter?
How to calculate ammeter?
How to calculate voltmeter reading?
What is the use of galvanometer as voltmeter and ammeter?
What is the difference between galvanometer and ammeter and voltmeter?
What is voltmeter and ammeter?
What are ammeter and voltmeter?
What is A voltmeter and ammeter?
What is a voltmeter and ammeter?
What is an ammeter and voltmeter?
How does a voltmeter differ from an ammeter?
What is an ammeter vs voltmeter?
What is ammeter vs voltmeter vs ammeter?
Is galvanometer a voltmeter or ammeter?
What is ammeter or voltmeter?
How to Calculate the charging Time and Charging current for battery Charging? Answer : To calculate the charging time and charging current for a battery, we need to know a few basic parameters. Here's how to calculate each: ### 1. **Charging Current Calculation:** The charging ... of batteries have different safe charging currents. Let me know if you need more details on this!...
How to calculate primary and secondary voltage?
How to calculate d and z values?
How is ammeter connected to galvanometer?
How to convert galvanometer into ammeter?
How galvanometer is converted to ammeter?
How to convert galvanometer to ammeter?
How to use galvanometer as ammeter?
How to measure ammeter?
How to select ammeter range?
How to use ammeter?
How to connect a voltmeter?
How to set a voltmeter?
How to measure a voltmeter?
How to convert galvanometer into voltmeter?
How to read a voltmeter?
How to work a voltmeter?
A wedge-shaped thin glass plate of refractive index 1.52 is used to observe fringes of equal thickness. The fringe spacing is 1 mm and the wavelength of light used is 5893 Å. Calculate the angle of the wedge.
A 3 phase line of 4 km length delivers 4000 kW at a p.f of 0.8 lagging to a load the resistance and reactance per km of each conductor are 0.2 Ω and 0.5 Ω respectively if the voltage at the supply end is maintained at 11 kV. Calculate the received end voltage and efficiency of line.
A uniform illumination of 150 lux is to be obtained on the floor of a room measuring 15m x 15m by arranging electric lights suitably. Calculate the number of lamps and wattage of each ... lamp efficiency is 20 lumens/watt. Assume and write suitable values of constants required for this calculation.
The power input to a 500V 50Hz 6Pole 3 phase induction motor running at 975 rpm is 40 kW. The stator losses are 1kW and friction and windage losses are 2kW. Calculate: (i) Slip (ii) Rotor copper loss (iii) Shaft power (iv) Efficiency
State Thevenin’s theorem and give a proof. Apply this theorem to calculate the current through a resistor.
A 3 φ I.M. has synchronous speed of 250rpm and 4% slip at full load. The rotor has a resistance of 0.02Ω/ph and stand still reactance of 0.15Ω/ph. Calculate i) The speed at which max torque is developed. ii) The ratio of maximum to F. L. torque. iii) The ratio of maximum to starting torque.
What is the formula for galvanometer to ammeter current?
How to calculate the Hall voltage?
How to calculate rpm using Hall effect sensor?
How to calculate Hall voltage?
How to calculate hall field?
How to calculate Zener current?
How to calculate RTD?
How to calculate PV factor?
29.4k questions
1.3k answers
7.4k users