5. Calculate the ratio of the protective transformers on the 11 kV side. Draw a neat circuit diagram and indicate the given values at appropriate places.

in Electrical Engineering

Related questions

in Electrical Engineering

A 220V/22kV three-phase transformer is connected in star/delta. The protective transformers on the 220V side have a current ratio of 400/5. Calculate the CT ratio on the 22kV side.

View solution

0 like 0 dislike

12 views 0 answers

in Electrical Engineering

A 3 phase line of 4 km length delivers 4000 kW at a p.f of 0.8 lagging to a load the resistance and reactance per km of each conductor are 0.2 Ω and 0.5 Ω respectively if the voltage at the supply end is maintained at 11 kV. Calculate the received end voltage and efficiency of line.
Answer : Let's break down the problem step by step and calculate the received end voltage and the efficiency of the line. ### Given Data: - Power delivered to the load, $ P = 4000 \, \text{kW} $ - Power factor, $ \text{p. ... voltage**: \( 10.43 \, \text{kV} $ - **Efficiency of the line**: $ 98.61\% $...

View solution

0 like 0 dislike

11 views 1 answer

in Electrical Engineering

A plant consists of two 10 MVA generators of reactance 18% each and two 5 MVA generators of 12% each. All are connected to bus bar to supply a load through three step up transformers of 8 MVA each having reactance of 8%. Determine fault MVA on HV side of any one transformer.
Answer : To determine the fault MVA on the high-voltage (HV) side of any one transformer, we need to first calculate the total reactance of the system (the combined reactance of all generators and transformers) and then ... Thus, the fault MVA on the high-voltage side of any one transformer is **8.77 MVA**....

View solution

0 like 0 dislike

16 views 1 answer

in Electrical Engineering

What is the relation between line and phase values in a star and delta connected system?

View solution

0 like 0 dislike

10 views 0 answers

in Electrical Engineering

Draw neat diagram of star-delta starter for three phase induction motor.

View solution

0 like 0 dislike

12 views 0 answers

in Electrical Engineering

A 500kVA distribution transformer having copper and iron losses of 5kW and 3kW respectively on full load. The transformer is loaded as shown below: Loading (kW) Power Factor (Lag) No. of hours 400 0.8 06 300 0.75 12 100 0.8 03 No load - 03 Calculate the all-day efficiency.
Answer : To calculate the all-day efficiency of the transformer, we need to consider the total energy output, the total energy input, and the losses over a 24-hour period. The transformer experiences two types of ... \] ### Final Answer: The all-day efficiency of the transformer is approximately **98.39%**....

View solution

0 like 0 dislike

15 views 1 answer

in Electrical Engineering

Describe the control of a single lamp from three places. Draw the relevant circuit diagram.

Describe the control of a single lamp from three places. Draw the relevant circuit diagram.
Answer : To control a single lamp from three different places, we can use a **three-way switch** system. In this setup, we use three switches to control the lamp, which is typically used in large rooms or ... of **two-way switches** and **three-way switches**, with the proper connection of traveler wires....

View solution

0 like 0 dislike

11 views 1 answer

in Electrical Engineering

Draw the single line diagram (layout) of 33/11 kV substation.

View solution

0 like 0 dislike

4 views 0 answers

in Electrical Engineering

State the relationship between line voltage & phase voltage and line current & phase current in a 3-phase star connected system.

State the relationship between line voltage & phase voltage and line current & phase current in a 3-phase star connected system.
Answer : In a 3-phase star (wye) connected system, the relationship between line voltage, phase voltage, line current, and phase current can be summarized as follows: ### 1. **Line Voltage and ... and currents behave in a 3-phase system, especially when configuring systems for different types of loads....

View solution

0 like 0 dislike

16 views 1 answer

in Electrical Engineering

Explain Star and Delta connected three-phase balanced circuits.

Explain Star and Delta connected three-phase balanced circuits.
Answer : In a three-phase system, circuits can be connected in two primary configurations: **Star (Y)** connection and **Delta (Δ)** connection. These configurations are used for both **generators** ... neutral is required, while the **Delta connection** is better for heavy power loads with higher currents....

View solution

0 like 0 dislike

18 views 1 answer

in Electrical Engineering

State the relationship between line voltage & phase voltage and line current & phase current in a 3-phase delta connected system.

State the relationship between line voltage & phase voltage and line current & phase current in a 3-phase delta connected system.
Answer : In a 3-phase **delta** connected system, the relationships between **line voltage**, **phase voltage**, **line current**, and **phase current** are as follows: ### 1. **Line Voltage and Phase ... line current and phase current are equal, and line voltage is $ \sqrt{3} $ times the phase voltage....

View solution

0 like 0 dislike

7 views 1 answer

in Electrical Engineering

A single phase wattmeter rated for 500 V; 5 A is having full scale deflection of 1000 watt. What is multiplying factor of the wattmeter?

View solution

0 like 0 dislike

7 views 0 answers

in Electrical Engineering

Draw a circuit diagram for polarity test on a single-phase transformer.

Draw a circuit diagram for polarity test on a single-phase transformer.
Answer : To perform a polarity test on a single-phase transformer, you would typically use a simple circuit setup where you compare the voltages from the primary and secondary windings of the ... and secondary windings are in the correct polarity, meaning the correct phase relationship between them....

View solution

0 like 0 dislike

11 views 1 answer

in Electrical Engineering

A 3 φ I.M. has synchronous speed of 250rpm and 4% slip at full load. The rotor has a resistance of 0.02Ω/ph and stand still reactance of 0.15Ω/ph. Calculate i) The speed at which max torque is developed. ii) The ratio of maximum to F. L. torque. iii) The ratio of maximum to starting torque.

View solution

0 like 0 dislike

18 views 0 answers

in Electrical Engineering

How do you calculate the appropriate wire gauge for a given current load?

View solution

0 like 0 dislike

11 views 0 answers

in Electrical Engineering

What is the relationship between the line voltage and the phase voltage in a delta connected load?

What is the relationship between the line voltage and the phase voltage in a delta connected load?
Answer : In a delta-connected load, the relationship between the line voltage ($V_L$) and the phase voltage ($V_\phi$) is: \[ V_L = V_\phi \] ### Explanation: - **Line Voltage ($V_L$)** is the ... line voltage is √3 times the phase voltage. So, in summary: - **Delta Connection**: $V_L = V_\phi$...

View solution

0 like 0 dislike

13 views 1 answer

in Electrical Engineering

Describe the method of converting a three-phase to a two-phase transformer by neat diagram. State any two applications.

View solution

0 like 0 dislike

10 views 0 answers

in Electrical Engineering

How to calculate current in 11 kV line?

How to calculate current in 11 kV line?
Answer : To calculate the **current in an 11 kV line**, you need to know **two key things**: 1. **The power being transmitted (in kW or MW)** 2. **The type of connection (single-phase or three-phase)* ... in kVA. --- ### Want a calculator or chart for common values? I can provide one. Would that help?...

View solution

0 like 0 dislike

22 views 1 answer

in Electrical Engineering

Draw a neat experimental setup to conduct OC test on a single-phase transformer.

View solution

0 like 0 dislike

8 views 0 answers

in Electrical Engineering

A 3-ph overhead line supported by 6 disc insulators, the potential across the unit is 11 KV. Assuming shunt capacitance between each Insulator and each metal link is of 1/5th of capacitance of insulator. Calculate:

View solution

0 like 0 dislike

15 views 0 answers

in Electrical Engineering

Explain control of a single lamp from four places. Draw the relevant circuit diagram.

View solution

0 like 0 dislike

11 views 0 answers

in Electrical Engineering

Which meter has a greater sensitivity and why? Meter A having a range of 0-10 V and a multiplier resistance of 18 kΩ and meter B with a range of 0-300 V and multiplier resistance of 298 kΩ? Both meter movements have a resistance of 2 kΩ.

View solution

0 like 0 dislike

12 views 0 answers

in Electrical Engineering

Explain with a neat circuit diagram only the Scott connection scheme for the conversion of three-phase supply to two-phase supply. Name one application of the same.

Explain with a neat circuit diagram only the Scott connection scheme for the conversion of three-phase supply to two-phase supply. Name one application of the same.
Answer : ### Scott Connection for Conversion of Three-Phase Supply to Two-Phase Supply The **Scott connection** is a method used to convert a three-phase system into a two-phase system. It ... This method ensures that the two-phase system is as balanced as possible, providing efficient power distribution....

View solution

0 like 0 dislike

9 views 1 answer

in Electrical Engineering

What is the relation between power in 3 phase delta and star connected system?

View solution

0 like 0 dislike

11 views 0 answers

in Electrical Engineering

What is the relationship of line and phase voltages and currents in a delta connected system?

View solution

0 like 0 dislike

11 views 0 answers

in Electrical Engineering

Why most of analog o/p devices having o/p range 4 to 20 mA and not 0 to 20 mA?

Why most of analog o/p devices having o/p range 4 to 20 mA and not 0 to 20 mA?
Answer : The main reason most analog output devices use a 4 to 20 mA range instead of 0 to 20 mA is to ensure reliable operation and easier detection of faults. Here's a breakdown of why 4- ... fault detection, and stability in signal transmission, which is why it's widely adopted in analog output devices....

View solution

0 like 0 dislike

11 views 1 answer

in Electrical Engineering

Draw a neat labelled diagram of 3-phase electronic energy meter.

View solution

0 like 0 dislike

9 views 0 answers

in Electrical Engineering

Why is the transformer connected in delta Star?

Why is the transformer connected in delta Star?
Answer : A transformer is connected in a **delta-star (Δ-Y)** configuration for several practical reasons in electrical systems. Here's why it's commonly used: ### 1. **Step-down Voltage* ... single-phase connections. It offers benefits like voltage stability, load balancing, and better handling of faults....

View solution

0 like 0 dislike

12 views 1 answer

in Electrical Engineering

Draw neat circuit diagram of (i) Feeder reactor and (ii) Generator reactor

View solution

0 like 0 dislike

10 views 0 answers

in Electrical Engineering

Draw the neat labelled diagram showing the controls available on front panel of CRO.

Draw the neat labelled diagram showing the controls available on front panel of CRO.
Answer : Sure! Here's a neat, labelled diagram of the front panel of a Cathode Ray Oscilloscope (CRO), along with a description of the controls typically found on it. ### **Diagram of Front ... you a solid understanding of the controls available on the front panel of a typical Cathode Ray Oscilloscope....

View solution

0 like 0 dislike

11 views 1 answer

in Electrical Engineering

Draw wiring diagram for connection of one lamp controlled from two places. State the application of this connection.

Draw wiring diagram for connection of one lamp controlled from two places. State the application of this connection.
Answer : To **control one lamp from two different locations**, a common wiring method used is the **two-way switch system**. This is often used in places like staircases, long hallways, or large rooms where it is ... | --- Would you like a **visual diagram image** to go with this explanation?...

View solution

0 like 0 dislike

4 views 1 answer

in Electrical Engineering

State significance of earthing. Draw and explain pipe earthing. State the values of earth resistances for: (i) Substation (ii) Residential wiring (iii) H.T. Line (iv) L.T. Line.

View solution

0 like 0 dislike

15 views 0 answers

in Electrical Engineering

Does a circle have 0 or 1 side?

Does a circle have 0 or 1 side?
Answer : A circle is often said to have **1 side**. This is because it's a continuous curve with no breaks or angles. So, while it doesn't have sides in the same way a polygon (like a triangle ... circle has 0 sides because it doesn't have straight edges, but mathematically, it's considered to have 1 side....

View solution

0 like 0 dislike

6 views 1 answer

in Electrical Engineering

Draw the constructional diagram of LVDT. State its working principle. What is residual voltage? Explain with a neat diagram.

View solution

0 like 0 dislike

10 views 0 answers

in Electrical Engineering

Draw the power flow diagram of three phase induction motor.

View solution

0 like 0 dislike

15 views 0 answers

in Electrical Engineering

Explain the conditions for setting up negative phase sequence currents in an alternator. Draw the protective scheme to detect them and operate the CB.

View solution

0 like 0 dislike

14 views 0 answers

in Electrical Engineering

Determine the power factor of an RLC series circuit with given values.

View solution

0 like 0 dislike

11 views 0 answers

in Electrical Engineering

Calculate the voltage necessary and current flowing through a dielectric heating system given specific parameters.

Calculate the voltage necessary and current flowing through a dielectric heating system given specific parameters.
Answer : To calculate the voltage necessary and the current flowing through a dielectric heating system, we need to know the following parameters: 1. **Power required for heating** (P) - the power needed to heat the ... know if you have specific values you'd like to use, and I can help you calculate that!...

View solution

0 like 0 dislike

22 views 1 answer

in Electrical Engineering

Draw the circuit diagram and phasor diagram of nominal T method of medium transmission line.

Draw the circuit diagram and phasor diagram of nominal T method of medium transmission line.
Answer : ### Nominal T Method of Medium Transmission Line In the **Nominal T method** of representing a medium transmission line, the series impedance (Z) is represented in the form of a "T", where the series impedance is placed in the middle of the ... | / | Is ----|...

View solution

0 like 0 dislike

10 views 1 answer

in Electrical Engineering

Derive the expression of line current in terms of phase voltage in delta connection.

Derive the expression of line current in terms of phase voltage in delta connection.
Answer : In a **delta (Δ) connection**, the line current $ I_L $ is related to the phase current $ I_P $, and the phase voltage $ V_P $ is related to the line voltage $ V_L $. ... geometry of the delta connection. This shows how the line current is related to the phase voltage in a delta connection....

View solution

0 like 0 dislike

12 views 1 answer

in Electrical Engineering

A uniform illumination of 150 lux is to be obtained on the floor of a room measuring 15m x 15m by arranging electric lights suitably. Calculate the number of lamps and wattage of each ... lamp efficiency is 20 lumens/watt. Assume and write suitable values of constants required for this calculation.
Answer : To solve this lighting problem, we'll follow a step-by-step method using the **lumen method** (also called the **flux method**). The goal is to determine the **number of lamps** and their ** ... --- Would you like me to show this as a diagram or table format for easier presentation to students?...

View solution

0 like 0 dislike

12 views 1 answer

in Electrical Engineering

What is the current in the RL circuit at a time t=0?

What is the current in the RL circuit at a time t=0?
Answer : In an RL circuit (a circuit containing a resistor $R$ and an inductor $L$), the current at time $t = 0$ depends on the nature of the circuit and the initial conditions. If the circuit is powered by a voltage ... $t = 0$ is 0 A. * If the circuit has an initial current $i_0$, then $i(0) = i_0$....

View solution

0 like 0 dislike

11 views 1 answer

in Electrical Engineering

Draw a neat labeled diagram of a neon sign tube and explain its working.

View solution

0 like 0 dislike

15 views 0 answers

in Electrical Engineering

What are the advantages of star and delta connected systems?

What are the advantages of star and delta connected systems?
Answer : Star and delta connections are two different ways to connect three-phase electrical systems, and each has its own advantages depending on the application. Here's a comparison: ### **Star Connection (Wye ... voltage step-up or step-down (via transformers), and delta used for power delivery to loads....

View solution

0 like 0 dislike

15 views 1 answer

in Electrical Engineering

What is Delta connected and star connected?

View solution

0 like 0 dislike

9 views 0 answers

in Electrical Engineering

What is the formulae for delta and star connected system?

What is the formulae for delta and star connected system?
Answer : In electrical engineering, Delta (Δ) and Star (Y) connections refer to the way the windings of three-phase systems (like transformers and motors) are connected. Here are the key ... electrical systems and help in calculating voltages, currents, and impedances for different types of connections....

View solution

0 like 0 dislike

16 views 1 answer

in Electrical Engineering

What is the difference between star connected load and delta connected load?

What is the difference between star connected load and delta connected load?
Answer : In electrical systems, the terms "star" and "delta" refer to different ways of connecting the components (like resistors, motors, etc.) in a three-phase system. The main difference between **star- ... while **Delta Connection** is used for higher voltage, heavier loads where more power is required....

View solution

0 like 0 dislike

9 views 1 answer

in Electrical Engineering

What is the formula for Delta and star connected system?

What is the formula for Delta and star connected system?
Answer : In a three-phase electrical system, the **Delta (Δ)** and **Star (Y)** configurations are common ways to connect loads or sources. Each configuration has specific formulas to ... transformers, motors, and generators when you're dealing with phase voltages and impedances in different configurations....

View solution

0 like 0 dislike

14 views 1 answer