Electrical Engineering

🔍

Google Login

🖊️Ask a Question

Electrical Engineering

Is 0 a yes or no?

in Electrical Engineering

Is 0 a yes or no?

1 Answer

In many contexts, 0 is typically used to represent no, and 1 is used to represent yes. This is common in binary systems, where 0 and 1 are used to represent two possible states (off/on, false/true, no/yes). However, the interpretation of 0 can vary depending on the situation. For example:

In programming and logic, 0 is usually false or no.

In some other contexts, like voting, 0 could be interpreted as no (opposed) and 1 as yes (agreed).

So, in general, 0 is often associated with no, but it depends on how it's being used!

Related questions

in Electrical Engineering

Is Boolean yes or no?

Is Boolean yes or no?
Answer : Yes, in Boolean logic, the values are **true** and **false**. These are often represented as: - **True** = Yes - **False** = No So, **Yes** corresponds to **True**, and **No** corresponds ... **. It's a simple way of saying that something is either in one state (True/Yes) or another (False/No)....

0 like 0 dislike

7 views 1 answer

×

Full Screen Image

in Electrical Engineering

Is the conventional current flow the same direction as the flow of the electrons A yes b no?

Is the conventional current flow the same direction as the flow of the electrons A yes b no?

0 like 0 dislike

5 views 0 answers

×

Full Screen Image

in Electrical Engineering

Is the conventional current flow the same direction as the flow of the electrons a yes b no?

Is the conventional current flow the same direction as the flow of the electrons a yes b no?

0 like 0 dislike

4 views 0 answers

×

Full Screen Image

in Electrical Engineering

A 500kVA distribution transformer having copper and iron losses of 5kW and 3kW respectively on full load. The transformer is loaded as shown below: Loading (kW) Power Factor (Lag) No. of hours 400 0.8 06 300 0.75 12 100 0.8 03 No load - 03 Calculate the all-day efficiency.

A 500kVA distribution transformer having copper and iron losses of 5kW and 3kW respectively on full load. The transformer is loaded as shown below: Loading (kW) Power Factor (Lag) No. of hours 400 0.8 06 300 0.75 12 100 0.8 03 No load - 03 Calculate the all-day efficiency.
Answer : To calculate the all-day efficiency of the transformer, we need to consider the total energy output, the total energy input, and the losses over a 24-hour period. The transformer experiences two types of ... \] ### Final Answer: The all-day efficiency of the transformer is approximately **98.39%**....

0 like 0 dislike

6 views 1 answer

×

Full Screen Image

in Electrical Engineering

Does a circle have 0 or 1 side?

Does a circle have 0 or 1 side?
Answer : A circle is often said to have **1 side**. This is because it's a continuous curve with no breaks or angles. So, while it doesn't have sides in the same way a polygon (like a triangle ... circle has 0 sides because it doesn't have straight edges, but mathematically, it's considered to have 1 side....

0 like 0 dislike

4 views 1 answer

×

Full Screen Image

in Electrical Engineering

Is 0 true or false?

Is 0 true or false?

0 like 0 dislike

5 views 0 answers

×

Full Screen Image

in Electrical Engineering

Can a photon have 0 spin?

Can a photon have 0 spin?
Answer : No, a photon cannot have zero spin. A photon is a particle of light, and it always has a spin of 1. However, its spin can only take certain values depending on the direction it's moving. Photons are **massless** ... motion. So, in summary, a photon always has spin 1, but it can't have a spin of 0....

0 like 0 dislike

9 views 1 answer

×

Full Screen Image

in Electrical Engineering

Why is a diode 0.7 V?

Why is a diode 0.7 V?
Answer : The 0.7V you're referring to is typically the **forward voltage drop** of a **silicon diode**. It's the minimum voltage required for the diode to allow current to flow through it ... for the silicon material to overcome its internal barrier and allow current to flow in the forward direction....

0 like 0 dislike

6 views 1 answer

×

Full Screen Image

in Electrical Engineering

What is the current in the RL circuit at a time t=0?

What is the current in the RL circuit at a time t=0?

0 like 0 dislike

6 views 0 answers

×

Full Screen Image

in Electrical Engineering

How strong is a 0.5 tesla magnet?

How strong is a 0.5 tesla magnet?

0 like 0 dislike

5 views 0 answers

×

Full Screen Image

in Electrical Engineering

How does a capacitor behave at T=0?

How does a capacitor behave at T=0?

0 like 0 dislike

6 views 0 answers

×

Full Screen Image

in Electrical Engineering

What does 0 hg mean on a battery?

What does 0 hg mean on a battery?
Answer : The "0 hg" label on a battery typically refers to "0 inches of mercury" (Hg), which is a way of measuring pressure in a vacuum or sealed environment. In the context of a battery, ... on a typical battery, it might be best to check the manufacturer's manual or datasheet for further clarification....

0 like 0 dislike

5 views 1 answer

×

Full Screen Image

in Electrical Engineering

Is a power of 0.8 good?

Is a power of 0.8 good?

0 like 0 dislike

4 views 0 answers

×

Full Screen Image

in Electrical Engineering

Is a power factor of 0.8 good?

Is a power factor of 0.8 good?
Answer : A power factor of 0.8 means that 80% of the power is being used effectively, and 20% is wasted. In many industrial or commercial settings, a power factor of 0.8 is considered okay but not ... not optimal. Aiming for a power factor closer to 1 is usually preferred for efficiency and cost savings....

0 like 0 dislike

6 views 1 answer

×

Full Screen Image

in Electrical Engineering

Which meter has a greater sensitivity and why? Meter A having a range of 0-10 V and a multiplier resistance of 18 kΩ and meter B with a range of 0-300 V and multiplier resistance of 298 kΩ? Both meter movements have a resistance of 2 kΩ.

Which meter has a greater sensitivity and why? Meter A having a range of 0-10 V and a multiplier resistance of 18 kΩ and meter B with a range of 0-300 V and multiplier resistance of 298 kΩ? Both meter movements have a resistance of 2 kΩ.

0 like 0 dislike

4 views 0 answers

×

Full Screen Image

in Electrical Engineering

A 3 phase line of 4 km length delivers 4000 kW at a p.f of 0.8 lagging to a load the resistance and reactance per km of each conductor are 0.2 Ω and 0.5 Ω respectively if the voltage at the supply end is maintained at 11 kV. Calculate the received end voltage and efficiency of line.

A 3 phase line of 4 km length delivers 4000 kW at a p.f of 0.8 lagging to a load the resistance and reactance per km of each conductor are 0.2 Ω and 0.5 Ω respectively if the voltage at the supply end is maintained at 11 kV. Calculate the received end voltage and efficiency of line.
Answer : Let's break down the problem step by step and calculate the received end voltage and the efficiency of the line. ### Given Data: - Power delivered to the load, \( P = 4000 \, \text{kW} \) - Power factor, \( \text{p. ... voltage**: \( 10.43 \, \text{kV} \) - **Efficiency of the line**: \( 98.61\% \)...

0 like 0 dislike

7 views 1 answer

×

Full Screen Image

in Electrical Engineering

A three-phase transformer having a line voltage ratio of 0.4 kV/11kV is connected Star/Delta and protective transformers on the 0.4 kV side have a current ratio of 500/5. Calculate the ratio of the protective transformers on the 11 kV side. Draw a neat circuit diagram and indicate the given values at appropriate places.

A three-phase transformer having a line voltage ratio of 0.4 kV/11kV is connected Star/Delta and protective transformers on the 0.4 kV side have a current ratio of 500/5. Calculate the ratio of ... on the 11 kV side. Draw a neat circuit diagram and indicate the given values at appropriate places.

0 like 0 dislike

6 views 0 answers

×

Full Screen Image

in Electrical Engineering

A workshop measures 10m × 25m. The shop is illuminated by 24 lamps of 200 watts each. The lumen efficiency of each lamp is 15 lumens per watt. Depreciation factor is assumed to be 0.8 and a coefficient of utilization 0.5. Determine the illumination on the working plane.

A workshop measures 10m × 25m. The shop is illuminated by 24 lamps of 200 watts each. The lumen efficiency of each lamp is 15 lumens per watt. Depreciation factor is assumed to be 0.8 and a coefficient of utilization 0.5. Determine the illumination on the working plane.

0 like 0 dislike

4 views 0 answers

×

Full Screen Image

in Electrical Engineering

A 3 φ I.M. has synchronous speed of 250rpm and 4% slip at full load. The rotor has a resistance of 0.02Ω/ph and stand still reactance of 0.15Ω/ph. Calculate i) The speed at which max torque is developed. ii) The ratio of maximum to F. L. torque. iii) The ratio of maximum to starting torque.

A 3 φ I.M. has synchronous speed of 250rpm and 4% slip at full load. The rotor has a resistance of 0.02Ω/ph and stand still reactance of 0.15Ω/ph. Calculate i) The speed at which max torque is developed. ii) The ratio of maximum to F. L. torque. iii) The ratio of maximum to starting torque.

0 like 0 dislike

9 views 0 answers

×

Full Screen Image

in Electrical Engineering

Is there a 0 in binary?

Is there a 0 in binary?

0 like 0 dislike

7 views 0 answers

×

Full Screen Image

in Electrical Engineering

A motor has to exert power starting from zero and rising uniformly to 150 HP in 8 mins after which it works at constant power of 100 HP for 5 mins. The motor remains on no load for next 5 mins. The cycle again starts and repeats indefinitely. Determine suitable size of motor.

A motor has to exert power starting from zero and rising uniformly to 150 HP in 8 mins after which it works at constant power of 100 HP for 5 mins. The motor remains on no load for next 5 mins. The cycle again starts and repeats indefinitely. Determine suitable size of motor.

0 like 0 dislike

4 views 0 answers

×

Full Screen Image

in Electrical Engineering

Why is there no reactance in a DC circuit?

Why is there no reactance in a DC circuit?
Answer : In a DC (Direct Current) circuit, the current flows in one direction only, and the voltage is constant (not alternating). Reactance is a property that comes into play when there is ... magnetic field (for inductance) or charging/discharging behavior (for capacitance), leading to no reactance....

0 like 0 dislike

5 views 1 answer

×

Full Screen Image

in Electrical Engineering

When no current flows through a conductor?

When no current flows through a conductor?

0 like 0 dislike

7 views 0 answers

×

Full Screen Image

in Electrical Engineering

Is 1-bit 0 and 1?

Is 1-bit 0 and 1?
Answer : Yes, a 1-bit can represent either a 0 or a 1. It's the most basic unit of data in computing and digital systems. In binary (the base-2 number system), the two possible values of a bit are 0 and 1, ... So when you hear "1-bit," think of it as a tiny piece of information that can either be 0 or 1....

0 like 0 dislike

9 views 1 answer

×

Full Screen Image

in Electrical Engineering

What is 0.5 kW mean?

What is 0.5 kW mean?

0 like 0 dislike

4 views 0 answers

×

Full Screen Image

in Electrical Engineering

Is 0 resistance possible?

Is 0 resistance possible?

0 like 0 dislike

4 views 0 answers

×

Full Screen Image

in Electrical Engineering

Are diodes always 0.7 V?

Are diodes always 0.7 V?

0 like 0 dislike

4 views 0 answers

×

Full Screen Image

in Electrical Engineering

What is 0.01 uF capacitor?

What is 0.01 uF capacitor?
Answer : A **0.01 µF (microfarad) capacitor** is an electronic component used to store electrical charge. The **"µF"** stands for **microfarads**, where **1 µF = 1 millionth of a farad** ... ** is a small-capacitance component used in a wide range of electronic circuits for storing and filtering charge....

0 like 0 dislike

6 views 1 answer

×

Full Screen Image

in Electrical Engineering

Is voltage 0 if current is 0?

Is voltage 0 if current is 0?

0 like 0 dislike

5 views 0 answers

×

Full Screen Image

in Electrical Engineering

Why is voltmeter 0?

Why is voltmeter 0?

0 like 0 dislike

5 views 0 answers

×

Full Screen Image

in Electrical Engineering

What does 0 ohms mean?

What does 0 ohms mean?

0 like 0 dislike

7 views 0 answers

×

Full Screen Image

in Electrical Engineering

Why most of analog o/p devices having o/p range 4 to 20 mA and not 0 to 20 mA?

Why most of analog o/p devices having o/p range 4 to 20 mA and not 0 to 20 mA?
Answer : The main reason most analog output devices use a 4 to 20 mA range instead of 0 to 20 mA is to ensure reliable operation and easier detection of faults. Here's a breakdown of why 4- ... fault detection, and stability in signal transmission, which is why it's widely adopted in analog output devices....

0 like 0 dislike

6 views 1 answer

×

Full Screen Image

in Electrical Engineering

What is the impulse function at t 0?

What is the impulse function at t 0?

0 like 0 dislike

5 views 0 answers

×

Full Screen Image

in Electrical Engineering

What is the emissivity of 0?

What is the emissivity of 0?

0 like 0 dislike

4 views 0 answers

×

Full Screen Image

in Electrical Engineering

Is there an instantaneous change in the voltage across the capacitor at t 0?

Is there an instantaneous change in the voltage across the capacitor at t 0?
Answer : No, there is no instantaneous change in the voltage across a capacitor at \( t = 0 \). The voltage across a capacitor cannot change instantaneously due to the capacitor's inherent ... switch being turned on or off), the voltage across the capacitor will change gradually, not instantaneously....

0 like 0 dislike

6 views 1 answer

×

Full Screen Image

in Electrical Engineering

What is epsilon 0?

What is epsilon 0?

0 like 0 dislike

8 views 0 answers

×

Full Screen Image

in Electrical Engineering

What is the SI unit for epsilon 0?

What is the SI unit for epsilon 0?

0 like 0 dislike

4 views 0 answers

×

Full Screen Image

in Electrical Engineering

Why is voltage always 0?

Why is voltage always 0?
Answer : Voltage is not always 0. However, if you're asking why voltage sometimes seems to be zero in certain situations, it could be due to a few reasons: 1. **Reference Point**: Voltage is always ... appear to be 0 in certain scenarios depending on where you're measuring and the condition of the circuit....

0 like 0 dislike

11 views 1 answer

×

Full Screen Image

in Electrical Engineering

Can resistance be 0 ohms?

Can resistance be 0 ohms?

0 like 0 dislike

5 views 0 answers

×

Full Screen Image

in Electrical Engineering

How can voltmeter read 0?

How can voltmeter read 0?

0 like 0 dislike

8 views 0 answers

×

Full Screen Image

in Electrical Engineering

An industrial consumer charged with the scheduled tariff of Rs.250 /kVA per month for maximum demand and 150 paisa per unit consumed for load factor of 60% and 80%. Find overall cost per unit at i) unity P.F. ii) 0.9 P.F. consider maximum demand of 50 kVA.

An industrial consumer charged with the scheduled tariff of Rs.250 /kVA per month for maximum demand and 150 paisa per unit consumed for load factor of 60% and 80%. Find overall cost per unit at i) unity P.F. ii) 0.9 P.F. consider maximum demand of 50 kVA.
Answer : To solve this, we need to calculate the total cost of electricity consumption for an industrial consumer, considering the maximum demand (MD), load factor (LF), and power factor (PF) at ... tariff is based on kVA, and the load factor and total consumption determine the cost more significantly....

0 like 0 dislike

9 views 1 answer

×

Full Screen Image

in Electrical Engineering

What is 0.01 mm called?

What is 0.01 mm called?
Answer : 0.01 mm is called **10 micrometers (µm)**. In metric units: - 1 millimeter (mm) = 1,000 micrometers (µm) - So, 0.01 mm = 10 µm. Micrometer (µm) is a common unit used to measure very small distances or thicknesses....

0 like 0 dislike

8 views 1 answer

×

Full Screen Image

in Electrical Engineering

Is 0 black in binary?

Is 0 black in binary?

0 like 0 dislike

8 views 0 answers

×

Full Screen Image

in Electrical Engineering Mathematics

Solve the following using Taylor’s Series Method (up to 3 terms): \[ \frac{dy}{dx} = x^2 + y, \quad y(0) = 1 \] Find \( y(0.2) \).

Solve the following using Taylor’s Series Method (up to 3 terms): \[ \frac{dy}{dx} = x^2 + y, \quad y(0) = 1 \] Find \( y(0.2) \).

0 like 0 dislike

28 views 0 answers

×

Full Screen Image

in Electrical Engineering Mathematics

Solve the linear homogeneous equation \[ D^2y - 5Dy + 6y = 0 \]

Solve the linear homogeneous equation \[ D^2y - 5Dy + 6y = 0 \]

0 like 0 dislike

13 views 0 answers

×

Full Screen Image

in Electrical Engineering

Which is the No 1 electronic market in India?

Which is the No 1 electronic market in India?
Answer : The No. 1 electronic market in India is often considered to be **Nehru Place** in New Delhi. It's one of the largest hubs for electronic products and components in the country. You can find a wide range ... . But **Nehru Place** stands out due to its size, variety, and the sheer number of vendors....

0 like 0 dislike

7 views 1 answer

×

Full Screen Image

in Electrical Engineering

Why series motor cannot be started on no-load?

Why series motor cannot be started on no-load?

0 like 0 dislike

3 views 0 answers

×

Full Screen Image

in Electrical Engineering

Why power factor of the transformer under no load is very low?

Why power factor of the transformer under no load is very low?
Answer : The power factor of a transformer under no load is very low because the primary current mainly consists of magnetizing current. Here's why: 1. **Magnetizing Current**: When the transformer is on no ... core and not to supply real power to a load, resulting in a high proportion of reactive power....

0 like 0 dislike

5 views 1 answer

×

Full Screen Image

in Electrical Engineering

What is the speed variation of the induction motor from no load to full load?

What is the speed variation of the induction motor from no load to full load?

0 like 0 dislike

3 views 0 answers

×

Full Screen Image

in Electrical Engineering

What is the power factor of an alternator at no load?

What is the power factor of an alternator at no load?
Answer : At **no load**, the power factor of an alternator is typically **very low**, close to **zero**. This happens because, at no load, the alternator is not supplying any real power (active ... zero. As the load increases, the alternator starts supplying more real power, and the power factor improves....

0 like 0 dislike

2 views 1 answer

×

Full Screen Image