🔍
Back

Find the value of unknown resistance X in the circuit shown in the figure if no current flows through the section AO. Also calculate the current drawn by the circuit from the battery of emf. 6V and negligible internal resistance.

0 like 0 dislike

1 Answer

✔️
Best answer

Part 1: Finding the value of the unknown resistance X

The problem states that no current flows through the section AO. Let's label the central junction point as 'O'.

  1. Identify the Principle: The condition that no current flows through the resistor between points A and O (I_AO = 0) means that the electric potential at point A is equal to the electric potential at point O (V_A = V_O). This is the defining condition for a balanced Wheatstone bridge.

  2. Identify the Wheatstone Bridge: The resistors connected between points A, B, C, and O form a Wheatstone bridge.
    The four arms of the bridge are the resistors R_AB = 2Ω, R_AC = 4Ω, R_BO = 3Ω, and the unlabeled resistor between O and C, which we will assume is the unknown resistance X (i.e., R_OC = X).
    The resistor between A and O acts as the galvanometer arm. Its resistance value is not given, but since the bridge is balanced, its value is irrelevant for this calculation.

  3. Apply the Balance Condition: For a balanced Wheatstone bridge, the ratio of resistances in the adjacent arms is equal.

    R_AB / R_BO = R_AC / R_OC

  4. Substitute the known values and solve for X:

    2Ω / 3Ω = 4Ω / X

    To solve for X:

    2 X = 4 3
    2X = 12
    X = 12 / 2
    X = 6Ω

Therefore, the value of the unknown resistance is .


Part 2: Calculating the current drawn from the battery

Now that we know the bridge is balanced, we can simplify the circuit to find the total equivalent resistance and then the total current.

  1. Simplify the Circuit: Since no current flows through the arm AO, we can remove it from the circuit for the purpose of calculating the equivalent resistance. The circuit simplifies as follows:
    The resistors R_AB (2Ω) and R_AC (4Ω) are in series, forming one branch.
    The resistors R_BO (3Ω) and R_OC (6Ω) are in series, forming a second branch.
    These two branches are connected in parallel between points B and C.
    This entire parallel combination is in series with the 2.4Ω resistor.

  2. Calculate the Resistance of the Series Branches:
    Resistance of the upper branch (R_upper): R_AB + R_AC = 2Ω + 4Ω =
    Resistance of the lower branch (R_lower): R_BO + R_OC = 3Ω + 6Ω =

  3. Calculate the Equivalent Resistance of the Parallel Combination (R_p):

    1 / R_p = 1 / R_upper + 1 / R_lower
    1 / R_p = 1/6 + 1/9

    To add these fractions, find a common denominator (18):

    1 / R_p = 3/18 + 2/18 = 5/18

    R_p = 18 / 5 = 3.6Ω

  4. Calculate the Total Equivalent Resistance of the Circuit (R_eq):
    The parallel combination (R_p) is in series with the 2.4Ω resistor.

    R_eq = R_p + 2.4Ω
    R_eq = 3.6Ω + 2.4Ω = 6.0Ω

  5. Calculate the Total Current Drawn from the Battery:
    Using Ohm's Law (I = V / R), with the battery's EMF (V) of 6V and the total equivalent resistance (R_eq) of 6.0Ω. The internal resistance is negligible.

    I_total = V / R_eq
    I_total = 6V / 6.0Ω
    I_total = 1A

Final Answer

  • The value of the unknown resistance X is 6Ω.
  • The current drawn by the circuit from the battery is 1A.
0 like 0 dislike
Next ⇨Next ⇨⇦ Previous⇦ Previous

Related questions

A battery of emf 10 V and internal resistance 3 Ohm is connected to a resistor. If the current in the circuit is 0.5 A, what is the resistance of the resistor? What is the terminal voltage of the battery when the circuit is closed?
Answer : ### Given Information: * **EMF of the battery (E):** 10 V * **Internal resistance (r):** 3 Ω * **Current in the circuit (I):** 0.5 A --- ### 1. What is the resistance of the ... text{V}$ Both methods give the same result. **Answer:** The terminal voltage of the battery is **8.5 V**....

Show More
X Full Screen Image
Electrical Engineering

The storage battery of a car has an emf of 12V . If the internal resistance of the battery is 0.4 Ohm , what is the maximum current that can be drawn from the battery?
Answer : The maximum current that can be drawn from the battery is **30 Amperes (A)**. --- ### Detailed Explanation #### 1. Understand the Concepts * **EMF (Electromotive Force, $\mathcal{E ... even explode. This calculation is a theoretical maximum. **Never attempt to short-circuit a car battery.**...

Show More
X Full Screen Image
Electrical Engineering

A storage battery of emf 8.0 V and internal resistance 0.5 Ohm is being charged by a 120 V DC supply using a series resistor of 15.5 Ohm . What is the terminal voltage of the battery during charging? What is the purpose of having a series resistor in the charging circuit?
Answer : ### Given Data: * Electromotive force (emf) of the battery, $E = 8.0 \text{ V}$ * Internal resistance of the battery, $r = 0.5 \text{ } \Omega$ * DC supply voltage, $V_{supply} = ... to a much safer and more manageable **7.0 A**, protecting both the battery and the power supply from damage....

Show More
X Full Screen Image
Electrical Engineering

Six lead-acid type of secondary cells each of emf 2.0 V and internal resistance 0.015 Ohm are joined in series to provide a supply to a resistance of 8.5 Ohm . What is the current drawn from the supply and its terminal voltage?
Answer : ### Given Data: * Number of cells, **n = 6** * EMF of each cell, **E_cell = 2.0 V** * Internal resistance of each cell, **r_cell = 0.015 Ω** * External resistance (load), **R = 8.5 Ω ... The current drawn from the supply is **1.40 A**. * The terminal voltage of the supply is **11.9 V**....

Show More
X Full Screen Image
Electrical Engineering

A battery of emf E and internal resistance r sends a current, I1 , I2 when connected to an external resistance of R1 , R2 respectively. Find the emf. and internal resistance of the battery.
Answer : Let's derive the expressions for the electromotive force (EMF) and the internal resistance of the battery step-by-step. ### Understanding the Setup The core principle we'll use is Ohm's law applied to the entire circuit. For a ... $$ **EMF (E):** $$ E = \frac{I_1 I_2 (R_1 - R_2)}{I_2 - I_1} $$...

Show More
X Full Screen Image
Electrical Engineering

Three identical cells, each of emf. 2V and unknown internal resistance are connected in parallel. This combination is connected to a 5 ohm resistor. If the terminal voltage across the cell is 1.5 volt. What is the internal resistance of each cell? Hence define the internal resistance of a cell?
Answer : ### Part 1: Calculating the Internal Resistance Here's how we can find the internal resistance of each cell. **Given Data:** * Electromotive force (EMF) of each cell, E = 2 V * Number of identical cells ... . * **I** is the current flowing from the cell. * **r** is the internal resistance....

Show More
X Full Screen Image
Electrical Engineering

Find the Thevenin equivalent circuit of the circuit shown in Fig. to the left of the terminals a-b. Then find the current through RL = 6, 16, and 36 Ohm. ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=8797772883006435339
Answer : Solution : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=9419660387739356857...

Show More
X Full Screen Image
Electrical Engineering

A set of n-identical resistors, each of resistance R ohm when connected in series have an effective resistance of X ohm and when the resistors are connected in parallel the effective resistance is Y ohm. Find the relation between R , X and Y ?
Answer : Let's break this down step-by-step to find the relationship between R, X, and Y. ### 1. Resistors in Series When resistors are connected in series, their total effective resistance is the sum of ... the **geometric mean** of the total series resistance (X) and the total parallel resistance (Y)....

Show More
X Full Screen Image
Electrical Engineering

Two wires A and B are of the same metal and of same length have their areas of cross section in the ratio 2:1 if the same potential difference is applied across each wire in turn, what will be the ratio of current flowing in A & B ?
Answer : The ratio of the current flowing in wire A to wire B is **2:1**. --- ### Detailed Explanation Let's break down the problem using the relevant physics principles. #### 1. List the Given ... resistance, which is wire A. Our result confirms this: the current in A is twice the current in B....

Show More
X Full Screen Image
Electrical Engineering

In a potentiometer arrangement, a cell of emf 1.25V gives a balance point at 35.0cm length of the wire. If the cell is replaced by another cell and the balance point shifts to 63.0cm , what is the emf of the second cell?
Answer : ### Principle The working principle of a potentiometer is that the potential drop across any portion of a wire of uniform cross-section is directly proportional to the length of that portion, provided a constant current flows ... 2.25 V** ### Answer The EMF of the second cell is **2.25 V**....

Show More
X Full Screen Image
Electrical Engineering

Apply Thevenin's theorem to find the current flowing through 10 Ohm resistor in the circuit shown in Fig. ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=17093197202595013139
Answer : Solution : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=7777645411503729955...

Show More
X Full Screen Image
Electrical Engineering

Explain with the help of a circuit diagram, how the value of an unknown resistance can be determined using a Wheatstone bridge?
Answer : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=407323477172242274 ### **Introduction** A Wheatstone bridge is an electrical circuit used for the precise measurement of an ... (R₃) at the balance point has been recorded, the unknown resistance Rₓ can be calculated precisely....

Show More
X Full Screen Image
Electrical Engineering

Find the current in branch AB of the circuit shown in fig. using Source transformation ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=7019709196279102058
Answer : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=13018689032320312451 ### **Find the Current in Branch AB using Source Transformation** This article provides a detailed solution for finding ... direction. Therefore, the current of 84.5 mA flows from **node B to node A**....

Show More
X Full Screen Image
Electrical Engineering

Using source conversion, reduce the circuit shown in the figure into a single voltage source in series with a single resistance. ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=18414686426985693295
Answer : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=9298562401596151803 ### **Source Transformation Explained: A Step-by-Step Circuit Simplification Example** Source ... a resistor is a Norton equivalent circuit. Source transformation is the method to convert between them....

Show More
X Full Screen Image
Electrical Engineering

A cylindrical wire is stretched to increase its length by 10% calculate the percentage increase in resistance?
Answer : The percentage increase in resistance is **21%**. Here is the step-by-step calculation and explanation: ### The Key Concepts 1. **Resistance Formula:** The resistance (R) of a wire is given by: $R = \ ... R_1}{R_1} \times 100\%$ $\text{Percentage Increase} = 0.21 \times 100\% = \bf{21\%}$...

Show More
X Full Screen Image
Electrical Engineering

Three resistors 1 Ohm , 2 Ohm and 3 Ohm are combined in series. What is the total resistance of the combination?
Answer : When resistors are combined in series, the total resistance is the sum of the individual resistances. The formula is: R_total = R1 + R2 + R3 Given the values: * R1 = 1 Ω * R2 = 2 Ω * R3 = 3 Ω ... = 1 Ω + 2 Ω + 3 Ω = 6 Ω So, the total resistance of the combination is **6 Ohms**....

Show More
X Full Screen Image
Electrical Engineering

State one condition for maximum current to be drawn from the cell?
Answer : For maximum current to be drawn from a cell, the **external resistance in the circuit should be zero**. This condition is also known as a **short circuit**. **Explanation:** The current (I) drawn from a cell ... possible value is 0. When R = 0, the current is at its maximum value, I_max = E / r....

Show More
X Full Screen Image
Electrical Engineering

Find IL for the circuit shown in fig. using Source transformation. ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=4421852427935123661
Answer : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=7043185347050990986 ### **How to Find Current in a Circuit Using Source Transformation: A Step-by-Step Example** This article provides a detailed ... I2) from a total current (I_total) is `I2 = I_total * (R1 / (R1 + R2))`....

Show More
X Full Screen Image
Electrical Engineering

Convert the circuit shown in fig. into a single voltage source in series with resistance. ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=17118069873838951895
Answer : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=10997850983763419494 --- ### **Mastering Source Transformation: A Step-by-Step Circuit Simplification Example** Source transformation is a ... **30/31 Ω (or approximately 0.97 Ω) resistor**. **Final Circuit Diagram:** ...

Show More
X Full Screen Image
Electrical Engineering

Do conventional current and electron current flow in the same direction in an electric circuit?
Answer : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=13686190518983378217 The short answer is: **No, they flow in opposite directions.** Here is a detailed breakdown of why: ... what's happening inside the wire, you need to think about **electron current (negative to positive)**....

Show More
X Full Screen Image
Electrical Engineering

A Carbon resistor has three strips of red colour and a gold strip. What is the value of the resistor? What is its tolerance?
Answer : The value of a carbon resistor is determined by the standard resistor color code system. For a 4-band resistor: * **Band 1:** First significant digit * **Band 2:** Second significant ... a new resistor with these color bands will have an actual resistance somewhere between 2090 Ω and 2310 Ω....

Show More
X Full Screen Image
Electrical Engineering

If the temperature of a good conductor decreases, how does the relaxation time of electrons in the conductor change?
Answer : ### The Short Answer If the temperature of a good conductor decreases, the **relaxation time of electrons increases**. --- ### The Detailed Explanation To understand why, let's break ... **. This is why good conductors become even better conductors (less resistive) at lower temperatures....

Show More
X Full Screen Image
Electrical Engineering

A steady current flow in a metallic conductor of non-uniform crosssection. Which of these quantities is constant along the conductor: current, current density, electric field, drift speed?
Answer : Here is a detailed explanation for each quantity: ### 1. Current (I) * **Why it's constant:** The term "steady current" implies that the rate of flow of charge ($I = dQ/dt$) is constant. Due to the ... ($v_d$)** | Not Constant | $v_d = I/(nAe)$. Since A is not constant, $v_d$ is not constant. |...

Show More
X Full Screen Image
Electrical Engineering

State why the resistance of the conductor increases with the rise in temperature.
Answer : Here is a clear explanation of why the resistance of a conductor increases with a rise in temperature, broken down into a simple analogy and the underlying physics. --- ### Simple Analogy: The ... More collisions** mean more opposition to the flow, which is, by definition, **higher resistance**....

Show More
X Full Screen Image
Electrical Engineering

A silver wire has a resistance of 2.1 Ohm at 27.5 degree C , and a resistance of 2.7 Ohm at 100 degree C . Determine the temperature coefficient of resistivity of silver.
Answer : ### 1. Understand the Principle The relationship between resistance and temperature for most metals (like silver) over a moderate temperature range is approximately linear and can be described by the formula: $R_2 = ... 00394 °C⁻¹** Alternatively, in scientific notation: **α = 3.94 x 10⁻³ °C⁻¹**...

Show More
X Full Screen Image
Electrical Engineering

A low voltage supply from which one needs high currents must have very low internal resistance. Why?
Answer : ### The Simple Analogy: A Water Pipe Imagine your power supply is a large water tank (representing the voltage) and you need to get a high flow of water (high current) out of a pipe at ... extremely small, this will generate a massive amount of heat, which can damage or destroy the power supply....

Show More
X Full Screen Image
Electrical Engineering

Two heated wires of the same dimensions are first connected in series and then it’s parallel to a source of supply. What will be the ratio of heat produced in the two cases?
Answer : Here is the step-by-step solution: ### The Short Answer The ratio of heat produced in the series case to the parallel case is **1:4**. --- ### Detailed ... proportional to this current, the parallel circuit draws significantly more power and therefore produces significantly more heat....

Show More
X Full Screen Image
Electrical Engineering

Name any one material having a small value of temperature coefficient of resistance. Write one use of this material?
Answer : **Material:** **Manganin** (an alloy of copper, manganese, and nickel) **Use:** Due to its very low temperature coefficient of resistance, it is used to make ** ... for electrical measuring instruments like ammeters and Wheatstone bridges, where a stable and predictable resistance is essential....

Show More
X Full Screen Image
Electrical Engineering

A high tension (HT) supply of, say, 6 kV must have a very large internal resistance. Why?
Answer : The primary reason is **safety and current limiting**. Let's use Ohm's Law ($V = IR$) to understand this. A power supply can be modeled as an ideal voltage source ($V_s$) in series ... HT supply for **power transmission** has a very low internal resistance for **efficiency and power delivery**....

Show More
X Full Screen Image
Electrical Engineering

Using source conversion, convert the given circuit into an equivalent circuit containing a single resistance and voltage source. ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=4024946229561106108
Answer : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=8995260068267182734 --- ### **Mastering Circuit Analysis: A Step-by-Step Guide to Source Transformation** Source ... polarity of voltage sources and the direction of current sources at every step to ensure an accurate result....

Show More
X Full Screen Image
Electrical Engineering

Describe with sketches the process of laying of underground cables by the drawing in method.
Answer : ### **The "Drawing In" Method for Laying Underground Cables** This method involves first installing a system of pipes or conduits (called ducts) underground. The cables are then pulled, or " ... duct system. However, this is often offset by the long-term flexibility and protection it provides....

Show More
X Full Screen Image
Electrical Engineering

Why do we prefer a potentiometer to measure the emf of a cell rather than a voltmeter?
Answer : The primary reason we prefer a potentiometer to measure the EMF of a cell is that **a potentiometer draws no current from the cell at the point of measurement.** A voltmeter, by its ... method ensures no current is drawn, thereby eliminating any error caused by the source's internal resistance....

Show More
X Full Screen Image
Electrical Engineering

If potential difference V applied across a conductor is increased to 2V , how will the drift velocity of the electron change?
Answer : ### Short Answer If the potential difference V applied across a conductor is increased to 2V, the **drift velocity of the electrons will also double**. ### Detailed Explanation Let's ... the electric field, which doubles the force on the electrons, which doubles their average drift velocity....

Show More
X Full Screen Image
Electrical Engineering

Given n resistors each of resistance R, how will you combine them to get the (i) maximum (ii) minimum effective resistance? What is the ratio of the maximum to minimum resistance?
Answer : The two fundamental ways to combine resistors are in **series** and in **parallel**. These two configurations yield the maximum and minimum possible resistances, respectively. --- ### (i) Maximum Effective Resistance To obtain the * ... {min} = R/n$ | | **Ratio** | $R_{max} / R_{min}$ | $n^2$ |...

Show More
X Full Screen Image
Electrical Engineering

What happens to the resistance of the wire when its length is increased to twice its original length?
Answer : This gets to the core of how resistance works. The short and direct answer is: **The resistance of the wire will double.** Here's a more detailed explanation of why. ### 1. The Simple Explanation (Analogy) Think of the wire ... (x2) | Halves (x0.5) | **Quadruples (x4)** |...

Show More
X Full Screen Image
Electrical Engineering

What are the fundamental limitations of traditional "hard-switched" PWM converters, and how do resonant or "soft-switching" techniques like Zero Voltage Switching (ZVS) and Zero Current Switching (ZCS) overcome these limitations to achieve higher efficiency and power density?
Answer : This question addresses the critical challenge of **switching loss**, the primary barrier to increasing the operating frequency, and therefore the power density, of modern power converters. ** ... state-of-the-art applications like server power supplies, EV chargers, and renewable energy inverters....

Show More
X Full Screen Image
Electrical Engineering

Explain the choice of size and number of generator units in a power plant.
Answer : --- ### The Fundamental Trade-Off At its core, the decision boils down to a trade-off between two main approaches: 1. **A Few Large Units:** This approach leverages **economies ... designed with multiple, fast-ramping units to complement the variability of wind and solar power on the grid....

Show More
X Full Screen Image
Electrical Engineering

Explain the reasons for failure of gaseous and solid dielectric materials used in electrical engineering application.
Answer : ### **Introduction to Dielectric Failure** A dielectric material is an electrical insulator that can be polarized by an applied electric field. Its primary function in electrical engineering is to ... Often a slow, aging-related process - Highly sensitive to impurities, voids, and moisture |...

Show More
X Full Screen Image
Electrical Engineering

Explain the use of the following components in electrical wiring system and give specification of each: (i) MCB (ii) ELCB
Answer : ### Introduction In any modern electrical wiring system, safety and protection are paramount. Devices like MCBs and ELCBs are critical safety components installed in a consumer unit (also known as a ... (lighting, sockets, etc.) | Protecting a group of circuits or an entire installation |...

Show More
X Full Screen Image
Electrical Engineering

Explain the uses of safety rubber hand gloves and rubber mats in electrical engineering.
Answer : In electrical engineering, safety is paramount. Two of the most fundamental and critical pieces of Personal Protective Equipment (PPE) are **safety rubber hand gloves** and **insulating rubber ... environment and preventing a worker's body from becoming the path of least resistance for electricity....

Show More
X Full Screen Image
Electrical Engineering

State the term “Phase” and “Phase difference” in case of alternating qualities.
Answer : # Phase and Phase Difference in Alternating Current: Complete Guide ## What is Phase in AC Circuits? **Phase** in alternating current (AC) systems refers to the instantaneous ... between quantities of the same frequency. Different frequency components are analyzed separately in harmonic analysis....

Show More
X Full Screen Image
Electrical Engineering

Given the following electrical circuit, calculate the output voltage Vo across the 4 kΩ resistor using source transformation. ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=17431506859821844536
Answer : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=16228213692693242430 ### **Solved Example: Calculating Output Voltage (Vo) using Source Transformation** This article provides a complete walkthrough ... The output voltage **Vo** across the 4 kΩ resistor is **10.6448 V**. ...

Show More
X Full Screen Image
Electrical Engineering

Obtain ohm’s law from the expression for electrical conductivity.
Answer : We can derive the familiar form of Ohm's Law ($V=IR$) by starting with the fundamental expression for electrical conductivity ($\sigma$). This derivation beautifully connects the microscopic behavior of ... total **current ($I$)** flowing through it, successfully obtaining Ohm's Law, $V=IR$....

Show More
X Full Screen Image
Electrical Engineering

Define emf. of a cell? On what factors does it depend?
Answer : ### Definition of EMF (Electromotive Force) The **EMF (Electromotive Force)** of a cell is defined as the maximum potential difference between its two terminals when no current is being drawn ... *, not its EMF. A larger distance increases the path ions must travel, increasing internal resistance....

Show More
X Full Screen Image
Electrical Engineering

Is ohm’s law universally applicable for all conducting elements? If not, give examples of elements which do not obey Ohm’s law.
Answer : The answer is no, **Ohm's law is not universally applicable for all conducting elements.** Ohm's law is an empirical rule, not a fundamental law of nature. It accurately describes the ... under stable conditions, but it is far from a universal law for all materials that conduct electricity....

Show More
X Full Screen Image
Electrical Engineering

How does a microcontroller, which operates exclusively with discrete digital values (1s and 0s), measure a continuous, real-world analog signal like the temperature from a sensor?
Answer : The bridge between the analog real world and the digital world of a microcontroller is a crucial mixed-signal circuit called an **Analog-to-Digital Converter (ADC)**. Virtually all modern ... measurement like temperature, allowing a purely digital device to sense and react to the analog world....

Show More
X Full Screen Image
Electrical Engineering

State the types of protections provided by MCB.
Answer : A Miniature Circuit Breaker (MCB) provides two fundamental types of protection for an electrical circuit. Both are designed to protect the wiring and connected appliances from damage caused by excessive ... dangers of excessive current: **slow-burning overloads** and **violent short circuits**....

Show More
X Full Screen Image
Electrical Engineering

With suitable circuit diagram, show how emfs of 2 cells can be compared using a potentiometer?
Answer : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=16022041933233000659 ### **Principle of a Potentiometer** A potentiometer works on the principle that the potential drop ... -section. 4. The current in the primary circuit should be kept constant throughout the experiment....

Show More
X Full Screen Image
Electrical Engineering

Two electric bulbs A and B are marked 220V , 40W and 220V 60W respectively. Which one has a higher resistance?
Answer : **The 40W bulb (Bulb A) has a higher resistance.** Here's the detailed explanation of why: ### The Relationship The relationship between Power (P), Voltage (V), and Resistance (R) is given by ... to get more water through a pipe; you need a wider pipe (less resistance) to increase the flow rate....

Show More
X Full Screen Image
Electrical Engineering

What is the difference between electrical Power (kW) and electrical Energy (kWh), and why do industrial consumers get penalized for having a low Power Factor even if their energy consumption remains the same?
Answer : This question touches on the fundamental economic and technical aspects of utilizing electrical energy. The answer lies in understanding what you are billed for versus what the utility company must actually ... strain on the grid, minimizes energy losses, and frees up capacity for other customers....

Show More
X Full Screen Image
Electrical Engineering
Learn Electrical and Electronics Engineering the easy way at Electrical-Engineering.app – tutorials, tools, calculators, and video lessons for students, professionals, and beginners.

Categories

174 questions

188 answers

11.9k users

...