🔍
Back

The storage battery of a car has an emf of 12V . If the internal resistance of the battery is 0.4 Ohm , what is the maximum current that can be drawn from the battery?

0 like 0 dislike

1 Answer

✔️
Best answer

The maximum current that can be drawn from the battery is 30 Amperes (A).


Detailed Explanation

1. Understand the Concepts
  • EMF (Electromotive Force, $\mathcal{E}$): This is the total voltage the battery can supply. In this case, $\mathcal{E}$ = 12 V.
  • Internal Resistance (r): Every real battery has some internal resistance, which opposes the flow of current. Here, r = 0.4 Ω.
  • Maximum Current ($I_{max}$): The current drawn from a battery depends on the external circuit (the "load") connected to it. To get the maximum possible current, you need the minimum possible total resistance.
2. The Formula

The current (I) flowing from a battery is given by Ohm's Law, applied to the entire circuit:

$I = \frac{\text{Total Voltage}}{\text{Total Resistance}}$

In this case:
$I = \frac{\mathcal{E}}{r + R_{load}}$

Where:
$I$ is the current.
$\mathcal{E}$ is the EMF of the battery (12 V).
$r$ is the internal resistance (0.4 Ω).
$R_{load}$ is the resistance of the external circuit (the device being powered).

3. Finding the Maximum Current

To maximize the current ($I$), we need to make the denominator ($r + R{load}$) as small as possible. Since the internal resistance ($r$) is a fixed property of the battery, the only way to minimize the denominator is to make the external load resistance ($R{load}$) as small as possible.

The smallest possible value for $R_{load}$ is 0 Ω. This situation is called a short circuit.

So, for maximum current, we set $R_{load} = 0$. The formula becomes:

$I_{max} = \frac{\mathcal{E}}{r + 0} = \frac{\mathcal{E}}{r}$

4. Calculation

Now, we can plug in the given values:

  • $\mathcal{E}$ = 12 V
  • $r$ = 0.4 Ω

$I_{max} = \frac{12 \text{ V}}{0.4 \text{ Ω}}$

$I_{max} = 30 \text{ A}$

The maximum current that can be drawn from the battery is 30 Amperes.


Important Safety Note: A short circuit, as described here, is extremely dangerous with a car battery. The large current (30 A) would generate immense heat, potentially causing the wires to melt, the battery to overheat, and even explode. This calculation is a theoretical maximum. Never attempt to short-circuit a car battery.

0 like 0 dislike
Next ⇨Next ⇨⇦ Previous⇦ Previous

Related questions

Six lead-acid type of secondary cells each of emf 2.0 V and internal resistance 0.015 Ohm are joined in series to provide a supply to a resistance of 8.5 Ohm . What is the current drawn from the supply and its terminal voltage?
Answer : ### Given Data: * Number of cells, **n = 6** * EMF of each cell, **E_cell = 2.0 V** * Internal resistance of each cell, **r_cell = 0.015 Ω** * External resistance (load), **R = 8.5 Ω ... The current drawn from the supply is **1.40 A**. * The terminal voltage of the supply is **11.9 V**....

Show More
X Full Screen Image
Electrical Engineering

A battery of emf 10 V and internal resistance 3 Ohm is connected to a resistor. If the current in the circuit is 0.5 A, what is the resistance of the resistor? What is the terminal voltage of the battery when the circuit is closed?
Answer : ### Given Information: * **EMF of the battery (E):** 10 V * **Internal resistance (r):** 3 Ω * **Current in the circuit (I):** 0.5 A --- ### 1. What is the resistance of the ... text{V}$ Both methods give the same result. **Answer:** The terminal voltage of the battery is **8.5 V**....

Show More
X Full Screen Image
Electrical Engineering

A storage battery of emf 8.0 V and internal resistance 0.5 Ohm is being charged by a 120 V DC supply using a series resistor of 15.5 Ohm . What is the terminal voltage of the battery during charging? What is the purpose of having a series resistor in the charging circuit?
Answer : ### Given Data: * Electromotive force (emf) of the battery, $E = 8.0 \text{ V}$ * Internal resistance of the battery, $r = 0.5 \text{ } \Omega$ * DC supply voltage, $V_{supply} = ... to a much safer and more manageable **7.0 A**, protecting both the battery and the power supply from damage....

Show More
X Full Screen Image
Electrical Engineering

Find the value of unknown resistance X in the circuit shown in the figure if no current flows through the section AO. Also calculate the current drawn by the circuit from the battery of emf. 6V ... resistance. ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=394010198424626099
Answer : ### Part 1: Finding the value of the unknown resistance X The problem states that no current flows through the section AO. Let's label the central junction point as 'O'. 1. **Identify the Principle:** The ... resistance **X is 6Ω**. * The current drawn by the circuit from the battery is **1A**....

Show More
X Full Screen Image
Electrical Engineering

Three identical cells, each of emf. 2V and unknown internal resistance are connected in parallel. This combination is connected to a 5 ohm resistor. If the terminal voltage across the cell is 1.5 volt. What is the internal resistance of each cell? Hence define the internal resistance of a cell?
Answer : ### Part 1: Calculating the Internal Resistance Here's how we can find the internal resistance of each cell. **Given Data:** * Electromotive force (EMF) of each cell, E = 2 V * Number of identical cells ... . * **I** is the current flowing from the cell. * **r** is the internal resistance....

Show More
X Full Screen Image
Electrical Engineering

A battery of emf E and internal resistance r sends a current, I1 , I2 when connected to an external resistance of R1 , R2 respectively. Find the emf. and internal resistance of the battery.
Answer : Let's derive the expressions for the electromotive force (EMF) and the internal resistance of the battery step-by-step. ### Understanding the Setup The core principle we'll use is Ohm's law applied to the entire circuit. For a ... $$ **EMF (E):** $$ E = \frac{I_1 I_2 (R_1 - R_2)}{I_2 - I_1} $$...

Show More
X Full Screen Image
Electrical Engineering

Two wires A and B are of the same metal and of same length have their areas of cross section in the ratio 2:1 if the same potential difference is applied across each wire in turn, what will be the ratio of current flowing in A & B ?
Answer : The ratio of the current flowing in wire A to wire B is **2:1**. --- ### Detailed Explanation Let's break down the problem using the relevant physics principles. #### 1. List the Given ... resistance, which is wire A. Our result confirms this: the current in A is twice the current in B....

Show More
X Full Screen Image
Electrical Engineering

Explain with the help of a circuit diagram, how the value of an unknown resistance can be determined using a Wheatstone bridge?
Answer : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=407323477172242274 ### **Introduction** A Wheatstone bridge is an electrical circuit used for the precise measurement of an ... (R₃) at the balance point has been recorded, the unknown resistance Rₓ can be calculated precisely....

Show More
X Full Screen Image
Electrical Engineering

State one condition for maximum current to be drawn from the cell?
Answer : For maximum current to be drawn from a cell, the **external resistance in the circuit should be zero**. This condition is also known as a **short circuit**. **Explanation:** The current (I) drawn from a cell ... possible value is 0. When R = 0, the current is at its maximum value, I_max = E / r....

Show More
X Full Screen Image
Electrical Engineering

A set of n-identical resistors, each of resistance R ohm when connected in series have an effective resistance of X ohm and when the resistors are connected in parallel the effective resistance is Y ohm. Find the relation between R , X and Y ?
Answer : Let's break this down step-by-step to find the relationship between R, X, and Y. ### 1. Resistors in Series When resistors are connected in series, their total effective resistance is the sum of ... the **geometric mean** of the total series resistance (X) and the total parallel resistance (Y)....

Show More
X Full Screen Image
Electrical Engineering

In a potentiometer arrangement, a cell of emf 1.25V gives a balance point at 35.0cm length of the wire. If the cell is replaced by another cell and the balance point shifts to 63.0cm , what is the emf of the second cell?
Answer : ### Principle The working principle of a potentiometer is that the potential drop across any portion of a wire of uniform cross-section is directly proportional to the length of that portion, provided a constant current flows ... 2.25 V** ### Answer The EMF of the second cell is **2.25 V**....

Show More
X Full Screen Image
Electrical Engineering

A silver wire has a resistance of 2.1 Ohm at 27.5 degree C , and a resistance of 2.7 Ohm at 100 degree C . Determine the temperature coefficient of resistivity of silver.
Answer : ### 1. Understand the Principle The relationship between resistance and temperature for most metals (like silver) over a moderate temperature range is approximately linear and can be described by the formula: $R_2 = ... 00394 °C⁻¹** Alternatively, in scientific notation: **α = 3.94 x 10⁻³ °C⁻¹**...

Show More
X Full Screen Image
Electrical Engineering

Given n resistors each of resistance R, how will you combine them to get the (i) maximum (ii) minimum effective resistance? What is the ratio of the maximum to minimum resistance?
Answer : The two fundamental ways to combine resistors are in **series** and in **parallel**. These two configurations yield the maximum and minimum possible resistances, respectively. --- ### (i) Maximum Effective Resistance To obtain the * ... {min} = R/n$ | | **Ratio** | $R_{max} / R_{min}$ | $n^2$ |...

Show More
X Full Screen Image
Electrical Engineering

A Carbon resistor has three strips of red colour and a gold strip. What is the value of the resistor? What is its tolerance?
Answer : The value of a carbon resistor is determined by the standard resistor color code system. For a 4-band resistor: * **Band 1:** First significant digit * **Band 2:** Second significant ... a new resistor with these color bands will have an actual resistance somewhere between 2090 Ω and 2310 Ω....

Show More
X Full Screen Image
Electrical Engineering

Three resistors 1 Ohm , 2 Ohm and 3 Ohm are combined in series. What is the total resistance of the combination?
Answer : When resistors are combined in series, the total resistance is the sum of the individual resistances. The formula is: R_total = R1 + R2 + R3 Given the values: * R1 = 1 Ω * R2 = 2 Ω * R3 = 3 Ω ... = 1 Ω + 2 Ω + 3 Ω = 6 Ω So, the total resistance of the combination is **6 Ohms**....

Show More
X Full Screen Image
Electrical Engineering

If a wire is stretched to double its length. What will be its new resistivity?
Answer : The short answer is: **The new resistivity will be exactly the same.** --- ### The Detailed Explanation #### What is Resistivity? **Resistivity (ρ)** is an **intrinsic property** of a material. This ... 2) and area is halved (factor of 1/2). | Becomes **four times** the original resistance. |...

Show More
X Full Screen Image
Electrical Engineering

Two heated wires of the same dimensions are first connected in series and then it’s parallel to a source of supply. What will be the ratio of heat produced in the two cases?
Answer : Here is the step-by-step solution: ### The Short Answer The ratio of heat produced in the series case to the parallel case is **1:4**. --- ### Detailed ... proportional to this current, the parallel circuit draws significantly more power and therefore produces significantly more heat....

Show More
X Full Screen Image
Electrical Engineering

If potential difference V applied across a conductor is increased to 2V , how will the drift velocity of the electron change?
Answer : ### Short Answer If the potential difference V applied across a conductor is increased to 2V, the **drift velocity of the electrons will also double**. ### Detailed Explanation Let's ... the electric field, which doubles the force on the electrons, which doubles their average drift velocity....

Show More
X Full Screen Image
Electrical Engineering

A steady current flow in a metallic conductor of non-uniform crosssection. Which of these quantities is constant along the conductor: current, current density, electric field, drift speed?
Answer : Here is a detailed explanation for each quantity: ### 1. Current (I) * **Why it's constant:** The term "steady current" implies that the rate of flow of charge ($I = dQ/dt$) is constant. Due to the ... ($v_d$)** | Not Constant | $v_d = I/(nAe)$. Since A is not constant, $v_d$ is not constant. |...

Show More
X Full Screen Image
Electrical Engineering

What happens to the resistance of the wire when its length is increased to twice its original length?
Answer : This gets to the core of how resistance works. The short and direct answer is: **The resistance of the wire will double.** Here's a more detailed explanation of why. ### 1. The Simple Explanation (Analogy) Think of the wire ... (x2) | Halves (x0.5) | **Quadruples (x4)** |...

Show More
X Full Screen Image
Electrical Engineering

A low voltage supply from which one needs high currents must have very low internal resistance. Why?
Answer : ### The Simple Analogy: A Water Pipe Imagine your power supply is a large water tank (representing the voltage) and you need to get a high flow of water (high current) out of a pipe at ... extremely small, this will generate a massive amount of heat, which can damage or destroy the power supply....

Show More
X Full Screen Image
Electrical Engineering

With suitable circuit diagram, show how emfs of 2 cells can be compared using a potentiometer?
Answer : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=16022041933233000659 ### **Principle of a Potentiometer** A potentiometer works on the principle that the potential drop ... -section. 4. The current in the primary circuit should be kept constant throughout the experiment....

Show More
X Full Screen Image
Electrical Engineering

List the factors that affect the resistance of a metallic conductor.
Answer : The resistance of a metallic conductor is determined by four main factors. Here is a list and explanation of each factor: ### 1. Length of the Conductor (L) * **Relationship:** ... (Note: Temperature is not explicitly in this formula, as resistivity (ρ) itself is temperature-dependent.)*...

Show More
X Full Screen Image
Electrical Engineering

A high tension (HT) supply of, say, 6 kV must have a very large internal resistance. Why?
Answer : The primary reason is **safety and current limiting**. Let's use Ohm's Law ($V = IR$) to understand this. A power supply can be modeled as an ideal voltage source ($V_s$) in series ... HT supply for **power transmission** has a very low internal resistance for **efficiency and power delivery**....

Show More
X Full Screen Image
Electrical Engineering

Find the Thevenin equivalent circuit of the circuit shown in Fig. to the left of the terminals a-b. Then find the current through RL = 6, 16, and 36 Ohm. ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=8797772883006435339
Answer : Solution : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=9419660387739356857...

Show More
X Full Screen Image
Electrical Engineering

Define emf. of a cell? On what factors does it depend?
Answer : ### Definition of EMF (Electromotive Force) The **EMF (Electromotive Force)** of a cell is defined as the maximum potential difference between its two terminals when no current is being drawn ... *, not its EMF. A larger distance increases the path ions must travel, increasing internal resistance....

Show More
X Full Screen Image
Electrical Engineering

If the temperature of a good conductor decreases, how does the relaxation time of electrons in the conductor change?
Answer : ### The Short Answer If the temperature of a good conductor decreases, the **relaxation time of electrons increases**. --- ### The Detailed Explanation To understand why, let's break ... **. This is why good conductors become even better conductors (less resistive) at lower temperatures....

Show More
X Full Screen Image
Electrical Engineering

Why do we prefer a potentiometer to measure the emf of a cell rather than a voltmeter?
Answer : The primary reason we prefer a potentiometer to measure the EMF of a cell is that **a potentiometer draws no current from the cell at the point of measurement.** A voltmeter, by its ... method ensures no current is drawn, thereby eliminating any error caused by the source's internal resistance....

Show More
X Full Screen Image
Electrical Engineering

Discover the fundamentals of electric current. Learn the definition, the basic formula (I = Q/t), the difference between AC/DC, and the distinction between conventional current and electron flow.
Answer : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=15457729789953541712 *** # What is Electric Current? A Complete Guide to the Basics Electric current is the ... industry has continued to use conventional current (positive to negative) as the standard for circuit analysis....

Show More
X Full Screen Image
Electrical Engineering

A cylindrical wire is stretched to increase its length by 10% calculate the percentage increase in resistance?
Answer : The percentage increase in resistance is **21%**. Here is the step-by-step calculation and explanation: ### The Key Concepts 1. **Resistance Formula:** The resistance (R) of a wire is given by: $R = \ ... R_1}{R_1} \times 100\%$ $\text{Percentage Increase} = 0.21 \times 100\% = \bf{21\%}$...

Show More
X Full Screen Image
Electrical Engineering

What is the purpose of earthing or grounding in an electrical installation?
Answer : The primary and most critical purpose of earthing (or grounding, as it's more commonly called in North America) in an electrical installation is **safety**. It acts as a ... that saves lives and prevents fires by ensuring any dangerous electrical fault is instantly and automatically disconnected....

Show More
X Full Screen Image
Electrical Engineering

What is drift velocity? Derive expression for drift velocity of electrons in a good conductor in terms of relaxation time of electrons?
Answer : --- ### Part 1: What is Drift Velocity? In a metallic conductor (like a copper wire), the outer electrons of the atoms are not bound to individual atoms. They are free to move throughout the entire volume of ... field. * The magnitude of the drift velocity is given by: $v_d = \frac{e\tau}{m}E$....

Show More
X Full Screen Image
Electrical Engineering

What is the difference between a fundamental quantity and a derived quantity? Provide two examples of each.
Answer : ### The Core Difference In simple terms, **fundamental quantities** are the basic building blocks of measurement. They are independent of each other and cannot be expressed in terms of other physical quantities. Think of them as the ... ** ($m^2$), **Speed** (m/s), **Force** (Newton or kg·m/s²) |...

Show More
X Full Screen Image
Electrical Engineering

What is Electromotive Force (EMF)? How is it different from potential difference?
Answer : ### The Water Pump Analogy Imagine a water circuit with a pump and a water wheel. * **The Pump:** The pump does work on the water, lifting it up and giving it potential energy. It's the ... from a battery if you draw no current from it. The moment you use it, the terminal voltage drops slightly....

Show More
X Full Screen Image
Electrical Engineering

Two electric bulbs A and B are marked 220V , 40W and 220V 60W respectively. Which one has a higher resistance?
Answer : **The 40W bulb (Bulb A) has a higher resistance.** Here's the detailed explanation of why: ### The Relationship The relationship between Power (P), Voltage (V), and Resistance (R) is given by ... to get more water through a pipe; you need a wider pipe (less resistance) to increase the flow rate....

Show More
X Full Screen Image
Electrical Engineering

Is ohm’s law universally applicable for all conducting elements? If not, give examples of elements which do not obey Ohm’s law.
Answer : The answer is no, **Ohm's law is not universally applicable for all conducting elements.** Ohm's law is an empirical rule, not a fundamental law of nature. It accurately describes the ... under stable conditions, but it is far from a universal law for all materials that conduct electricity....

Show More
X Full Screen Image
Electrical Engineering

Using source conversion, convert the given circuit into an equivalent circuit containing a single resistance and voltage source. ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=4024946229561106108
Answer : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=8995260068267182734 --- ### **Mastering Circuit Analysis: A Step-by-Step Guide to Source Transformation** Source ... polarity of voltage sources and the direction of current sources at every step to ensure an accurate result....

Show More
X Full Screen Image
Electrical Engineering

Name any one material having a small value of temperature coefficient of resistance. Write one use of this material?
Answer : **Material:** **Manganin** (an alloy of copper, manganese, and nickel) **Use:** Due to its very low temperature coefficient of resistance, it is used to make ** ... for electrical measuring instruments like ammeters and Wheatstone bridges, where a stable and predictable resistance is essential....

Show More
X Full Screen Image
Electrical Engineering

State why the resistance of the conductor increases with the rise in temperature.
Answer : Here is a clear explanation of why the resistance of a conductor increases with a rise in temperature, broken down into a simple analogy and the underlying physics. --- ### Simple Analogy: The ... More collisions** mean more opposition to the flow, which is, by definition, **higher resistance**....

Show More
X Full Screen Image
Electrical Engineering

Show that the points (8, 1) (3,-4) and (2,-5) are collinear using determinant.
Answer : ### **The Principle** Three points, (x₁, y₁), (x₂, y₂), and (x₃, y₃), are **collinear** (lie on the same straight line) if and only if the area of the triangle they form is zero. ... points do not form a triangle and must lie on the same straight line. Therefore, the points **are collinear**....

Show More
X Full Screen Image
Electrical Engineering

What is a meaning of load duration curve.
Answer : ### What is a Load Duration Curve? A **Load Duration Curve (LDC)** is a graph used in electrical power engineering to illustrate the relationship between power demand (load) and the amount ... operating a power grid. [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=787797341119232221...

Show More
X Full Screen Image
Electrical Engineering

What is a Cycle of a Wave?
Answer : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=1108964048200868098 --- ### What is a Cycle of a Wave? A Simple Guide with Diagram In physics, electronics, and ... understanding what a single cycle is, we can analyze, measure, and predict the behavior of any periodic wave....

Show More
X Full Screen Image
Electrical Engineering

Draw the graph showing the variation of conductivity with temperature for a metallic conductor?
Answer : The conductivity for a metallic conductor decreases with the increase in temperature. ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=10491891827766109637 ### Explanation: The Physics Behind the Graph To understand this ... | **Low** |...

Show More
X Full Screen Image
Electrical Engineering

Apply Thevenin's theorem to find the current flowing through 10 Ohm resistor in the circuit shown in Fig. ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=17093197202595013139
Answer : Solution : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=7777645411503729955...

Show More
X Full Screen Image
Electrical Engineering

Obtain ohm’s law from the expression for electrical conductivity.
Answer : We can derive the familiar form of Ohm's Law ($V=IR$) by starting with the fundamental expression for electrical conductivity ($\sigma$). This derivation beautifully connects the microscopic behavior of ... total **current ($I$)** flowing through it, successfully obtaining Ohm's Law, $V=IR$....

Show More
X Full Screen Image
Electrical Engineering

Do conventional current and electron current flow in the same direction in an electric circuit?
Answer : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=13686190518983378217 The short answer is: **No, they flow in opposite directions.** Here is a detailed breakdown of why: ... what's happening inside the wire, you need to think about **electron current (negative to positive)**....

Show More
X Full Screen Image
Electrical Engineering

Explain the concept of following terms : (i) Connected load (ii) Maximum demand
Answer : --- ### (i) Connected Load #### Definition **Connected Load** is the sum of the power ratings (in Watts or Kilowatts) of all electrical appliances and equipment installed in a consumer's ... infrastructure (wires, breakers). | **Billing & Grid Management** (demand charges, capacity planning). |...

Show More
X Full Screen Image
Electrical Engineering

In the world of electronics and electrical systems, not all currents and signals are constant. Many change over time in a repeating pattern. This is known as an Alternating Quantity.
Answer : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=7972430680887786847 *** ### Understanding Alternating Quantities & Common Waveforms: A Visual Guide In the world of electronics and ... **Amplitude:** The peak or maximum value of the wave, measured from the center line....

Show More
X Full Screen Image
Electrical Engineering

What is an AC Waveform?
Answer : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=15410724103918634750 --- ### **Understanding the AC Waveform: A Complete Guide** An AC (Alternating Current) ... analyzing AC circuits and is the foundation for more advanced topics like frequency, phase, and RMS values....

Show More
X Full Screen Image
Electrical Engineering

What is drift current?
Answer : ### The Simple Analogy: A River Imagine a wide, slow-moving river. The water molecules in the river are like the **charge carriers** (e.g., electrons) in a wire. * **Without a ... What's the opposite?** Diffusion current, which is caused by differences in concentration, not by an electric field....

Show More
X Full Screen Image
Electrical Engineering
Learn Electrical and Electronics Engineering the easy way at Electrical-Engineering.app – tutorials, tools, calculators, and video lessons for students, professionals, and beginners.

Categories

159 questions

173 answers

11.8k users

...