🔍
Back

If potential difference V applied across a conductor is increased to 2V , how will the drift velocity of the electron change?

0 like 0 dislike

1 Answer

✔️
Best answer

Short Answer

If the potential difference V applied across a conductor is increased to 2V, the drift velocity of the electrons will also double.

Detailed Explanation

Let's break down why this happens step-by-step:

  1. Potential Difference and Electric Field:
    When you apply a potential difference (voltage) $V$ across a conductor of length $L$, it creates a uniform electric field $E$ inside the conductor. The relationship is:
    $E = \frac{V}{L}$
    This electric field is what "pushes" the free electrons.

  2. Electric Field and Force:
    The electric field $E$ exerts a force $F$ on each free electron. Since an electron has a charge $e$, the force is:
    $F = eE$

  3. Force and Acceleration:
    According to Newton's second law ($F=ma$), this force causes the electrons to accelerate. The acceleration $a$ of an electron with mass $m$ is:
    $a = \frac{F}{m} = \frac{eE}{m}$

  4. Drift Velocity:
    An electron doesn't accelerate indefinitely. It constantly collides with the atoms (ions) of the conductor's lattice. These collisions randomize its direction and slow it down.
    Drift velocity ($v_d$) is the average velocity that an electron achieves due to the electric field, despite these constant collisions. It is related to the electron's acceleration ($a$) and the average time between collisions, known as the relaxation time ($\tau$).
    $v_d = a \tau$

  5. Putting It All Together:
    Now, let's substitute the expressions from the previous steps into the equation for drift velocity:
    $v_d = (\frac{eE}{m}) \tau$
    And since $E = V/L$:
    $v_d = (\frac{e(V/L)}{m}) \tau$
    $v_d = (\frac{e \tau}{mL}) V$

    In this final equation, the terms in the parenthesis ($e, \tau, m, L$) are all constants for a given conductor under constant temperature.
    $e$ = charge of an electron (constant)
    $m$ = mass of an electron (constant)
    $L$ = length of the conductor (constant)
    $\tau$ = relaxation time (assumed constant if temperature doesn't change)

    Therefore, we can see a direct relationship:
    $v_d \propto V$
    The drift velocity is directly proportional to the applied potential difference.

Conclusion

  • Initial State: $v_{d1} \propto V$
  • New State: The potential difference is doubled to $2V$.
  • Result: The new drift velocity $v{d2}$ will be:
    $v
    {d2} \propto 2V$
    Therefore, $v{d2} = 2 \times v{d1}$.

Doubling the potential difference doubles the electric field, which doubles the force on the electrons, which doubles their average drift velocity.

0 like 0 dislike
Next ⇨Next ⇨⇦ Previous⇦ Previous

Related questions

Two wires A and B are of the same metal and of same length have their areas of cross section in the ratio 2:1 if the same potential difference is applied across each wire in turn, what will be the ratio of current flowing in A & B ?
Answer : The ratio of the current flowing in wire A to wire B is **2:1**. --- ### Detailed Explanation Let's break down the problem using the relevant physics principles. #### 1. List the Given ... resistance, which is wire A. Our result confirms this: the current in A is twice the current in B....

Show More
X Full Screen Image
Electrical Engineering

Three identical cells, each of emf. 2V and unknown internal resistance are connected in parallel. This combination is connected to a 5 ohm resistor. If the terminal voltage across the cell is 1.5 volt. What is the internal resistance of each cell? Hence define the internal resistance of a cell?
Answer : ### Part 1: Calculating the Internal Resistance Here's how we can find the internal resistance of each cell. **Given Data:** * Electromotive force (EMF) of each cell, E = 2 V * Number of identical cells ... . * **I** is the current flowing from the cell. * **r** is the internal resistance....

Show More
X Full Screen Image
Electrical Engineering

If the temperature of a good conductor decreases, how does the relaxation time of electrons in the conductor change?
Answer : ### The Short Answer If the temperature of a good conductor decreases, the **relaxation time of electrons increases**. --- ### The Detailed Explanation To understand why, let's break ... **. This is why good conductors become even better conductors (less resistive) at lower temperatures....

Show More
X Full Screen Image
Electrical Engineering

A battery of emf 10 V and internal resistance 3 Ohm is connected to a resistor. If the current in the circuit is 0.5 A, what is the resistance of the resistor? What is the terminal voltage of the battery when the circuit is closed?
Answer : ### Given Information: * **EMF of the battery (E):** 10 V * **Internal resistance (r):** 3 Ω * **Current in the circuit (I):** 0.5 A --- ### 1. What is the resistance of the ... text{V}$ Both methods give the same result. **Answer:** The terminal voltage of the battery is **8.5 V**....

Show More
X Full Screen Image
Electrical Engineering

What is drift velocity? Derive expression for drift velocity of electrons in a good conductor in terms of relaxation time of electrons?
Answer : --- ### Part 1: What is Drift Velocity? In a metallic conductor (like a copper wire), the outer electrons of the atoms are not bound to individual atoms. They are free to move throughout the entire volume of ... field. * The magnitude of the drift velocity is given by: $v_d = \frac{e\tau}{m}E$....

Show More
X Full Screen Image
Electrical Engineering

Given n resistors each of resistance R, how will you combine them to get the (i) maximum (ii) minimum effective resistance? What is the ratio of the maximum to minimum resistance?
Answer : The two fundamental ways to combine resistors are in **series** and in **parallel**. These two configurations yield the maximum and minimum possible resistances, respectively. --- ### (i) Maximum Effective Resistance To obtain the * ... {min} = R/n$ | | **Ratio** | $R_{max} / R_{min}$ | $n^2$ |...

Show More
X Full Screen Image
Electrical Engineering

A steady current flow in a metallic conductor of non-uniform crosssection. Which of these quantities is constant along the conductor: current, current density, electric field, drift speed?
Answer : Here is a detailed explanation for each quantity: ### 1. Current (I) * **Why it's constant:** The term "steady current" implies that the rate of flow of charge ($I = dQ/dt$) is constant. Due to the ... ($v_d$)** | Not Constant | $v_d = I/(nAe)$. Since A is not constant, $v_d$ is not constant. |...

Show More
X Full Screen Image
Electrical Engineering

Six lead-acid type of secondary cells each of emf 2.0 V and internal resistance 0.015 Ohm are joined in series to provide a supply to a resistance of 8.5 Ohm . What is the current drawn from the supply and its terminal voltage?
Answer : ### Given Data: * Number of cells, **n = 6** * EMF of each cell, **E_cell = 2.0 V** * Internal resistance of each cell, **r_cell = 0.015 Ω** * External resistance (load), **R = 8.5 Ω ... The current drawn from the supply is **1.40 A**. * The terminal voltage of the supply is **11.9 V**....

Show More
X Full Screen Image
Electrical Engineering

In a potentiometer arrangement, a cell of emf 1.25V gives a balance point at 35.0cm length of the wire. If the cell is replaced by another cell and the balance point shifts to 63.0cm , what is the emf of the second cell?
Answer : ### Principle The working principle of a potentiometer is that the potential drop across any portion of a wire of uniform cross-section is directly proportional to the length of that portion, provided a constant current flows ... 2.25 V** ### Answer The EMF of the second cell is **2.25 V**....

Show More
X Full Screen Image
Electrical Engineering

If a wire is stretched to double its length. What will be its new resistivity?
Answer : The short answer is: **The new resistivity will be exactly the same.** --- ### The Detailed Explanation #### What is Resistivity? **Resistivity (ρ)** is an **intrinsic property** of a material. This ... 2) and area is halved (factor of 1/2). | Becomes **four times** the original resistance. |...

Show More
X Full Screen Image
Electrical Engineering

What happens to the resistance of the wire when its length is increased to twice its original length?
Answer : This gets to the core of how resistance works. The short and direct answer is: **The resistance of the wire will double.** Here's a more detailed explanation of why. ### 1. The Simple Explanation (Analogy) Think of the wire ... (x2) | Halves (x0.5) | **Quadruples (x4)** |...

Show More
X Full Screen Image
Electrical Engineering

Two heated wires of the same dimensions are first connected in series and then it’s parallel to a source of supply. What will be the ratio of heat produced in the two cases?
Answer : Here is the step-by-step solution: ### The Short Answer The ratio of heat produced in the series case to the parallel case is **1:4**. --- ### Detailed ... proportional to this current, the parallel circuit draws significantly more power and therefore produces significantly more heat....

Show More
X Full Screen Image
Electrical Engineering

A storage battery of emf 8.0 V and internal resistance 0.5 Ohm is being charged by a 120 V DC supply using a series resistor of 15.5 Ohm . What is the terminal voltage of the battery during charging? What is the purpose of having a series resistor in the charging circuit?
Answer : ### Given Data: * Electromotive force (emf) of the battery, $E = 8.0 \text{ V}$ * Internal resistance of the battery, $r = 0.5 \text{ } \Omega$ * DC supply voltage, $V_{supply} = ... to a much safer and more manageable **7.0 A**, protecting both the battery and the power supply from damage....

Show More
X Full Screen Image
Electrical Engineering

The storage battery of a car has an emf of 12V . If the internal resistance of the battery is 0.4 Ohm , what is the maximum current that can be drawn from the battery?
Answer : The maximum current that can be drawn from the battery is **30 Amperes (A)**. --- ### Detailed Explanation #### 1. Understand the Concepts * **EMF (Electromotive Force, $\mathcal{E ... even explode. This calculation is a theoretical maximum. **Never attempt to short-circuit a car battery.**...

Show More
X Full Screen Image
Electrical Engineering

Why can a DC motor run on a DC supply, but a transformer will be damaged if connected to the same DC supply?
Answer : The reason lies in their fundamentally different operating principles: **Back EMF** in a DC motor versus **Mutual Induction** in a transformer. **1. The DC Motor: Operation via Back EMF** A ... from an AC supply and has no internal mechanism to limit a DC current, leading to its rapid destruction....

Show More
X Full Screen Image
Electrical Engineering

What is the difference between electrical Power (kW) and electrical Energy (kWh), and why do industrial consumers get penalized for having a low Power Factor even if their energy consumption remains the same?
Answer : This question touches on the fundamental economic and technical aspects of utilizing electrical energy. The answer lies in understanding what you are billed for versus what the utility company must actually ... strain on the grid, minimizes energy losses, and frees up capacity for other customers....

Show More
X Full Screen Image
Electrical Engineering

Explain with the help of a circuit diagram, how the value of an unknown resistance can be determined using a Wheatstone bridge?
Answer : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=407323477172242274 ### **Introduction** A Wheatstone bridge is an electrical circuit used for the precise measurement of an ... (R₃) at the balance point has been recorded, the unknown resistance Rₓ can be calculated precisely....

Show More
X Full Screen Image
Electrical Engineering

Draw the graph showing the variation of conductivity with temperature for a metallic conductor?
Answer : The conductivity for a metallic conductor decreases with the increase in temperature. ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=10491891827766109637 ### Explanation: The Physics Behind the Graph To understand this ... | **Low** |...

Show More
X Full Screen Image
Electrical Engineering

What is Electromotive Force (EMF)? How is it different from potential difference?
Answer : ### The Water Pump Analogy Imagine a water circuit with a pump and a water wheel. * **The Pump:** The pump does work on the water, lifting it up and giving it potential energy. It's the ... from a battery if you draw no current from it. The moment you use it, the terminal voltage drops slightly....

Show More
X Full Screen Image
Electrical Engineering

What is the difference between a fundamental quantity and a derived quantity? Provide two examples of each.
Answer : ### The Core Difference In simple terms, **fundamental quantities** are the basic building blocks of measurement. They are independent of each other and cannot be expressed in terms of other physical quantities. Think of them as the ... ** ($m^2$), **Speed** (m/s), **Force** (Newton or kg·m/s²) |...

Show More
X Full Screen Image
Electrical Engineering

A cylindrical wire is stretched to increase its length by 10% calculate the percentage increase in resistance?
Answer : The percentage increase in resistance is **21%**. Here is the step-by-step calculation and explanation: ### The Key Concepts 1. **Resistance Formula:** The resistance (R) of a wire is given by: $R = \ ... R_1}{R_1} \times 100\%$ $\text{Percentage Increase} = 0.21 \times 100\% = \bf{21\%}$...

Show More
X Full Screen Image
Electrical Engineering

A battery of emf E and internal resistance r sends a current, I1 , I2 when connected to an external resistance of R1 , R2 respectively. Find the emf. and internal resistance of the battery.
Answer : Let's derive the expressions for the electromotive force (EMF) and the internal resistance of the battery step-by-step. ### Understanding the Setup The core principle we'll use is Ohm's law applied to the entire circuit. For a ... $$ **EMF (E):** $$ E = \frac{I_1 I_2 (R_1 - R_2)}{I_2 - I_1} $$...

Show More
X Full Screen Image
Electrical Engineering

Why do we prefer a potentiometer to measure the emf of a cell rather than a voltmeter?
Answer : The primary reason we prefer a potentiometer to measure the EMF of a cell is that **a potentiometer draws no current from the cell at the point of measurement.** A voltmeter, by its ... method ensures no current is drawn, thereby eliminating any error caused by the source's internal resistance....

Show More
X Full Screen Image
Electrical Engineering

A set of n-identical resistors, each of resistance R ohm when connected in series have an effective resistance of X ohm and when the resistors are connected in parallel the effective resistance is Y ohm. Find the relation between R , X and Y ?
Answer : Let's break this down step-by-step to find the relationship between R, X, and Y. ### 1. Resistors in Series When resistors are connected in series, their total effective resistance is the sum of ... the **geometric mean** of the total series resistance (X) and the total parallel resistance (Y)....

Show More
X Full Screen Image
Electrical Engineering

A Carbon resistor has three strips of red colour and a gold strip. What is the value of the resistor? What is its tolerance?
Answer : The value of a carbon resistor is determined by the standard resistor color code system. For a 4-band resistor: * **Band 1:** First significant digit * **Band 2:** Second significant ... a new resistor with these color bands will have an actual resistance somewhere between 2090 Ω and 2310 Ω....

Show More
X Full Screen Image
Electrical Engineering

What is Voltage? A Simple Guide to Electric Pressure (V)
Answer : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=14655249534964376862 *** ### What is Voltage? A Simple Guide to Electric Pressure (V) Voltage, often described as ... always more dangerous. The level of danger from electricity depends on a combination of voltage and current....

Show More
X Full Screen Image
Electrical Engineering

With suitable circuit diagram, show how emfs of 2 cells can be compared using a potentiometer?
Answer : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=16022041933233000659 ### **Principle of a Potentiometer** A potentiometer works on the principle that the potential drop ... -section. 4. The current in the primary circuit should be kept constant throughout the experiment....

Show More
X Full Screen Image
Electrical Engineering

What are the fundamental limitations of traditional "hard-switched" PWM converters, and how do resonant or "soft-switching" techniques like Zero Voltage Switching (ZVS) and Zero Current Switching (ZCS) overcome these limitations to achieve higher efficiency and power density?
Answer : This question addresses the critical challenge of **switching loss**, the primary barrier to increasing the operating frequency, and therefore the power density, of modern power converters. ** ... state-of-the-art applications like server power supplies, EV chargers, and renewable energy inverters....

Show More
X Full Screen Image
Electrical Engineering

Is ohm’s law universally applicable for all conducting elements? If not, give examples of elements which do not obey Ohm’s law.
Answer : The answer is no, **Ohm's law is not universally applicable for all conducting elements.** Ohm's law is an empirical rule, not a fundamental law of nature. It accurately describes the ... under stable conditions, but it is far from a universal law for all materials that conduct electricity....

Show More
X Full Screen Image
Electrical Engineering

Explain the suitability of copper as an electrical conductor with reference to its mechanical and electrical properties.
Answer : ### Introduction Copper is the industry standard for electrical wiring and conductors, and its widespread use is due to an exceptional combination of both electrical and mechanical properties. While ... for decades, making it the superior choice for the vast majority of electrical applications....

Show More
X Full Screen Image
Electrical Engineering

Explain the suitability of aluminum as an electrical conductor with respect to its mechanical and electrical properties.
Answer : Aluminum is an excellent and widely used electrical conductor, second only to copper in global usage. Its suitability is a trade-off: it is not as conductive as copper, but its significantly lower ... at a premium and high conductivity in a small package is essential, copper is the superior choice....

Show More
X Full Screen Image
Electrical Engineering

State why the resistance of the conductor increases with the rise in temperature.
Answer : Here is a clear explanation of why the resistance of a conductor increases with a rise in temperature, broken down into a simple analogy and the underlying physics. --- ### Simple Analogy: The ... More collisions** mean more opposition to the flow, which is, by definition, **higher resistance**....

Show More
X Full Screen Image
Electrical Engineering

Find the value of unknown resistance X in the circuit shown in the figure if no current flows through the section AO. Also calculate the current drawn by the circuit from the battery of emf. 6V ... resistance. ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=394010198424626099
Answer : ### Part 1: Finding the value of the unknown resistance X The problem states that no current flows through the section AO. Let's label the central junction point as 'O'. 1. **Identify the Principle:** The ... resistance **X is 6Ω**. * The current drawn by the circuit from the battery is **1A**....

Show More
X Full Screen Image
Electrical Engineering

What is the main difference between a rectifier and an inverter in power electronics?
Answer : A rectifier converts AC (Alternating Current) → DC (Direct Current). It is used in power supplies, battery charging, and DC motor drives. Example: diode bridge rectifier. An inverter converts DC ... , wind), UPS systems, and variable-frequency drives. Example: PWM (Pulse Width Modulated) inverter....

Show More
X Full Screen Image
Electrical Engineering

What is the difference between a diode and a transistor in electronics?
Answer : A diode is a two-terminal device that allows current to flow in only one direction. It is mainly used for rectification (converting AC to DC), voltage regulation, and protection ... input current/voltage, making it essential in signal amplification, digital logic circuits, and power control....

Show More
X Full Screen Image
Electrical Engineering

List the factors that affect the resistance of a metallic conductor.
Answer : The resistance of a metallic conductor is determined by four main factors. Here is a list and explanation of each factor: ### 1. Length of the Conductor (L) * **Relationship:** ... (Note: Temperature is not explicitly in this formula, as resistivity (ρ) itself is temperature-dependent.)*...

Show More
X Full Screen Image
Electrical Engineering

Discover the fundamentals of electric current. Learn the definition, the basic formula (I = Q/t), the difference between AC/DC, and the distinction between conventional current and electron flow.
Answer : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=15457729789953541712 *** # What is Electric Current? A Complete Guide to the Basics Electric current is the ... industry has continued to use conventional current (positive to negative) as the standard for circuit analysis....

Show More
X Full Screen Image
Electrical Engineering

Find the Thevenin equivalent circuit of the circuit shown in Fig. to the left of the terminals a-b. Then find the current through RL = 6, 16, and 36 Ohm. ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=8797772883006435339
Answer : Solution : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=9419660387739356857...

Show More
X Full Screen Image
Electrical Engineering

Three resistors 1 Ohm , 2 Ohm and 3 Ohm are combined in series. What is the total resistance of the combination?
Answer : When resistors are combined in series, the total resistance is the sum of the individual resistances. The formula is: R_total = R1 + R2 + R3 Given the values: * R1 = 1 Ω * R2 = 2 Ω * R3 = 3 Ω ... = 1 Ω + 2 Ω + 3 Ω = 6 Ω So, the total resistance of the combination is **6 Ohms**....

Show More
X Full Screen Image
Electrical Engineering

A silver wire has a resistance of 2.1 Ohm at 27.5 degree C , and a resistance of 2.7 Ohm at 100 degree C . Determine the temperature coefficient of resistivity of silver.
Answer : ### 1. Understand the Principle The relationship between resistance and temperature for most metals (like silver) over a moderate temperature range is approximately linear and can be described by the formula: $R_2 = ... 00394 °C⁻¹** Alternatively, in scientific notation: **α = 3.94 x 10⁻³ °C⁻¹**...

Show More
X Full Screen Image
Electrical Engineering

Why is accurately estimating Indirect Costs (Overhead) and Profit just as critical as correctly calculating the direct costs of labor and material when submitting a competitive and sustainable electrical bid?
Answer : This question gets to the heart of what separates a working electrician from a successful electrical contractor. While getting the direct costs right determines the *cost* of a job, getting ... reward the risk involved. All three are indispensable pillars of a successful electrical contracting bid....

Show More
X Full Screen Image
Electrical Engineering

How to calculate winding of transformer?
Answer : --- ### Part 1: The Core Concepts (The "Why") Before we jump into calculations, let's understand the key principles. #### 1. The Universal EMF Equation This is the heart of all transformer ... and between the windings and the core. If you are a beginner, start with low-voltage projects first....

Show More
X Full Screen Image
Electrical Engineering

How does a microcontroller, which operates exclusively with discrete digital values (1s and 0s), measure a continuous, real-world analog signal like the temperature from a sensor?
Answer : The bridge between the analog real world and the digital world of a microcontroller is a crucial mixed-signal circuit called an **Analog-to-Digital Converter (ADC)**. Virtually all modern ... measurement like temperature, allowing a purely digital device to sense and react to the analog world....

Show More
X Full Screen Image
Electrical Engineering

What is the difference between renewable and non-renewable resources, and why is the shift toward renewables important for sustainability?
Answer : Renewable resources are naturally replenished on a human timescale, such as solar, wind, hydro, and biomass energy. Non-renewable resources like coal, oil, and natural gas are finite ... that future generations have access to reliable energy sources without depleting the planet's natural reserves....

Show More
X Full Screen Image
Electrical Engineering

What is the difference between analog and digital instruments in electrical measurement?
Answer : Analog instruments use a continuously moving pointer or needle to represent the measured quantity. Example: moving-coil ammeter, analog voltmeter. They are simple and give a visual trend but have lower ... and can store or process data, but they may be costlier and require power supply/electronics....

Show More
X Full Screen Image
Electrical Engineering

What is the difference between AC (Alternating Current) and DC (Direct Current)?
Answer : Direct Current (DC): The flow of electric charge is in one constant direction. Sources include batteries, solar cells, and DC power supplies. It is mainly used in electronics, charging, ... because it can be easily transformed to higher or lower voltages using transformers, reducing energy loss....

Show More
X Full Screen Image
Electrical Engineering

State the term “Phase” and “Phase difference” in case of alternating qualities.
Answer : # Phase and Phase Difference in Alternating Current: Complete Guide ## What is Phase in AC Circuits? **Phase** in alternating current (AC) systems refers to the instantaneous ... between quantities of the same frequency. Different frequency components are analyzed separately in harmonic analysis....

Show More
X Full Screen Image
Electrical Engineering

Why is a 3D CAD model more than just a "digital drawing" when used for engineering simulation, and what key information must be added to this geometric model to perform a meaningful analysis like a stress test?
Answer : This question highlights the fundamental difference between defining an object's **form** (CAD) and predicting its **function** (Simulation). While a 3D CAD model is the essential starting point, it ... gradients, enabling them to identify and fix design flaws before a single piece of metal is cut....

Show More
X Full Screen Image
Electrical Engineering

State one condition for maximum current to be drawn from the cell?
Answer : For maximum current to be drawn from a cell, the **external resistance in the circuit should be zero**. This condition is also known as a **short circuit**. **Explanation:** The current (I) drawn from a cell ... possible value is 0. When R = 0, the current is at its maximum value, I_max = E / r....

Show More
X Full Screen Image
Electrical Engineering

In the circuit below, use a source transformation to determine Vo. ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=15669083920906828389
Answer : ![][1] [1]: https://electrical-engineering.app/?qa=blob&qa_blobid=4854655767405747567 --- ### **How to Use Source Transformation to Find Vo in a Circuit: A Step-by-Step Guide* ... voltage `Vo`. This example highlights why source transformation is an essential tool in **circuit analysis**....

Show More
X Full Screen Image
Electrical Engineering
Learn Electrical and Electronics Engineering the easy way at Electrical-Engineering.app – tutorials, tools, calculators, and video lessons for students, professionals, and beginners.

Categories

174 questions

188 answers

11.9k users

...